Unit of competency Outline

Date retreived
22/07/2026 5:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect suspension systems

Inspect suspension systems

Unit of competency
National Code
AURTTD003
State Code
AXA80
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
16
Description
This unit describes the performance outcomes required to inspect and test front and rear suspension system components and assess their condition. It involves preparing for the task, inspecting the system, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry. The suspension systems include those of heavy commercial vehicles or light vehicles.This unit applies to those inspecting suspension systems prior to conducting a wheel alignment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publications.
Notes
Elements and Performance Criteria
1. Prepare to inspect suspension system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection information is sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect suspension system
  • 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
3. Complete work processes
  • 3.1 Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 3.3 Tools and equipment are checked and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF405 AURTTD2003 Inspect suspension systems Unit of competency