Elements and Performance Criteria

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Information includes:
diagrams or sketches
instructions issued by authorised organisational or external personnel
manufacturer specifications and instructions, where specified
MSDS
memos
regulatory and legislative requirements pertaining to applying finishes
relevant Australian standards
safe work procedures relating to applying finishes
signage
verbal, written and graphical instructions
work bulletins
work schedules, plans and specifications.

Planning and preparation include:
assessment of conditions and hazards
determination of work requirements and safety plans and policies
equipment defect identification
work site inspection.

Work health and safety is to be according to state and territory legislation and regulations and project safety plan and may include:
emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation
hazard control
hazardous materials and substances
organisational first aid
PPE prescribed under legislation, regulations and workplace policies and practices
safe operating procedures, including the conduct of operational risk assessment and treatments associated with:
concealed services (water, power and gas)
lighting
restricted access barriers
traffic control
work site visitors and the public
working at heights
working in confined spaces
working in proximity to others
use of firefighting equipment
use of tools and equipment
workplace environmental requirements and safety.

Tools and equipment include:
air spray equipment
airless spray equipment
benches
brushes
buckets
dusting brushes
pads
paint stirrers
rags
roller accessories
rollers
spray guns
stools.

Quality requirements include:
control of handling procedures
finishing of surfaces
quality of materials
relevant regulations, including:
internal company quality policy and standards
manufacturer specifications where specified
workplace operations and procedures
spray application procedures
use and maintenance of equipment
workplace operations and procedures.

Materials include:
lacquers
paints
sealers.

Environmental requirements include:
clean-up management
dust and noise
stormwater protection
waste management.

Statutory and regulatory authority includes:
federal, state and local authorities administering applicable Acts, regulations and codes of practice.

Surfaces to be finished may be:
aluminium
medium density fibreboard (MDF)
particleboard
timber
veneered panelling.

Methods for applying finishes for both horizontal and vertical applications include:
brush
pad
roller
spray gun.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit
A person who demonstrates competency in this unit must be able to apply finishes to all the surfaces listed in the range statement, providing evidence of the ability to:
comply with WHS regulations applicable to workplace operations
apply organisational quality procedures and processes within context of applying finishes to timber and aluminium surfaces
identify designed finish and surface to be covered
identify and select appropriate materials and applicators to apply three separate types of finishes
select and use appropriate processes and safety requirements to prepare materials, application and area
select and use appropriate personal protective equipment
safely and effectively apply material to provide designed base coat
safely and efficiently sand and prepare surface before coat applications, where applicable
correctly and efficiently use applicators
safely and effectively apply coats of three specified finishes to surfaces, free from blemishes
identify typical faults and problems that occur and action required to rectify them
communicate with others to ensure safe and effective workshop operations.

Context of and specific resources for assessment
This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian standards' requirements.
Resource implications for assessment include:
workplace location appropriate for application processes
spray booth and appropriate spray equipment for activity
materials and equipment applicable to activity processes
documentation and specifications relevant to the application and finishes.
Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment
Assessment methods must:
satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package
include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application
reinforce the integration of employability skills with workplace tasks and job roles
confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments.
Validity and sufficiency of evidence requires that:
competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace
where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge
all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.
Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.
Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.