Unit of competency Outline

Date retreived
22/07/2026 11:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare to perform work associated with fuel system installation and servicing

Prepare to perform work associated with fuel system installation and servicing

Unit of competency
National Code
MEM18098
State Code
OAU31
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030503 - Vehicle Mechanics
Original Release Date
Nominal Hours
18
Description
This unit of competency defines the skills and knowledge required to prepare for work associated with fuel system installation and servicing.It applies to personnel who install or service fuel systems and equipment. They will typically undertake this in a service station forecourt which may be operational or be shut down for refurbishment or under construction.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit weight: 2
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Plan and prepare for installation or servicing task
  • 2.1 Clarify job requirements and variations to work plan and take appropriate action
  • 2.2 Obtain required work permits
  • 2.3 Identify and comply with emergency and safety procedures for worksite
3 Confirm location and nature of key fuel system components
  • 3.1 Identify and locate above and below ground storage components
  • 3.2 Identify and locate fuel conveying, pumps and dispensing systems
  • 3.3 Confirm location of fuel system components with site plan
  • 3.4 Identify and report any hazards and/or inconsistencies with site plan, equipment drawings and regulatory requirements
4 Assess and manage risks associated with the work
  • 4.1 Identify fuels and other hazardous materials and other hazards on site
  • 4.2 Identify and confirm shut-off procedures, details of evacuation plan and location of emergency equipment
  • 4.3 Assess hazards and determine risks and apply appropriate control measures to control risks
  • 4.4 Select appropriate tools and equipment to be used on the job
  • 4.5 Identify nature and location of required isolations
  • 4.6 Determine the type of, and appropriate locations for, barriers to prevent unauthorised access to the work location and put them in place before job commencement
No information
No information
Replaces
State Code National Code Title Type
D7534 MEM18098A Prepare to perform work associated with fuel system installation and servicing Unit of competency