Unit of competency Outline

Date retreived
22/07/2026 7:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain a tape edging machine

Set up, operate and maintain a tape edging machine

Unit of competency
National Code
MSFMB2006
State Code
WI577
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
20
Description
This unit of competency covers setting up, operating and maintaining a tape edging machine which uses automated processes to apply and finish edge on mattresses and bases.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan work operations
  • 1.1 Work instructions are used to determine job requirements, including quality, materials, equipment and quantities
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed through the work
  • 1.3 Material for processing is selected and inspected for quality
  • 1.4 Machine and the tape holder unit are identified and checked for safe and effective operation
  • 1.5 Procedures are determined for minimising waste material
  • 1.6 Procedures are identified for maximising energy efficiency while completing the job
2 Set up machines
  • 2.1 Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  • 2.2 Trial runs are conducted to check machine operation, accuracy and quality of finished work
  • 2.3 Necessary adjustments are made to machine settings
3 Complete tape edging
  • 3.1 Machine start-up procedure is carried out in accordance with manufacturer instructions
  • 3.2 Material is fed into machine in accordance with manufacturer instructions, tooling requirements, safe handling procedures and standard workplace operating procedures
  • 3.3 Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations
  • 3.4 Machine operation, including inputs and outcomes, is monitored to ensure product quality and output
  • 3.5 Waste quantities are checked and minimised
  • 3.6 Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
  • 3.7 Problems with the required work or the operation of the machine are identified and reported to appropriate persons
4 Clean up work area and maintain equipment
  • 4.1 Material that can be re-used is collected and stored
  • 4.2 Waste and scrap are removed following workplace procedures
  • 4.3 Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  • 4.4 Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
  • 4.5 Operator maintenance is completed in accordance with manufacturer specifications and site procedures
No information
No information
Replaces
State Code National Code Title Type
W8704 LMFMB3003B Set up, operate and maintain a tape edging machine Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification