Unit of competency Outline
Date retreived
22/07/2026 10:27 AM AWST
22/07/2026 10:27 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Set up, operate and maintain a tape edging machine
Set up, operate and maintain a tape edging machine
Unit of competency
National Code
LMFMB3003B
LMFMB3003B
State Code
W8704
W8704
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
30/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
30/09/2008
Nominal Hours
20
Description
This unit covers the competency to set up operate and maintain a tape edging machine which uses automated processes to apply and finish edge on mattresses and bases.
Notes
Elements and Performance Criteria
1. Plan work operations
- 1.1. Work instructions are used to determine job requirements, including quality, materials, equipment and quantities
- 1.2. Workplace health and safety requirements, including personal protection needs, are observed through the work
- 1.3. Material for processing is selected and inspected for quality
- 1.4. Machine and the tape holder unit are identified and checked for safe and effective operation
- 1.5. Procedures are determined for minimising waste material
- 1.6. Procedures are identified for maximising energy efficiency while completing the job
2. Set up machines
- 2.1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
- 2.2. Trial runs are conducted to check machine operation, accuracy and quality of finished work
- 2.3. Necessary adjustments are made to machine settings
3. Complete tape edging
- 3.1. Machine start-up procedure is carried out in accordance with manufacturers' instructions
- 3.2. Material is fed into machine in accordance with manufacturers' instructions, tooling requirements, safe handling procedures and standard workplace operating procedures
- 3.3. Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations
- 3.4. Machine operation, including inputs and outcomes, is monitored to ensure product quality and output
- 3.5. Waste quantities are checked and minimised
- 3.6. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
- 3.7. Problems with the required work or the operation of the machine are identified and reported to appropriate persons
4. Clean up work area and maintain equipment
- 4.1. Material that can be re-used is collected and stored
- 4.2. Waste and scrap is removed following workplace procedures
- 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
- 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
- 4.5. Operator maintenance is completed in accordance with manufacturer specifications and site procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
Work involves applying and processing a tape edge to a mattress or base
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy, dexterity and problem solving skills in the set up and operation of machines
Work will be performed in workplaces which are involved in the manufacture or restoration of mattresses and bases
Tape edging machine
Automated tape edging machines use automated processes to apply and finish edge treatments
Machines are to include either semi-automated or fully automated tape edging machines
Materials to be processed may include but are not limited to:
plain and patterned quilted fabric
edging tape
Operator maintenance
Operator maintenance is to include the cleaning and refurbishing of the tape edging head unit and tape holder
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Workplace procedures relating to the use and operations of tools
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
Work involves applying and processing a tape edge to a mattress or base
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances, dangerous goods codes and safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Work requires individuals to demonstrate skill, accuracy, dexterity and problem solving skills in the set up and operation of machines
Work will be performed in workplaces which are involved in the manufacture or restoration of mattresses and bases
Tape edging machine
Automated tape edging machines use automated processes to apply and finish edge treatments
Machines are to include either semi-automated or fully automated tape edging machines
Materials to be processed may include but are not limited to:
plain and patterned quilted fabric
edging tape
Operator maintenance
Operator maintenance is to include the cleaning and refurbishing of the tape edging head unit and tape holder
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.
Information and procedures
Workplace procedures relating to the use and operations of tools
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify, set up and operate a semi-automated or automated tape edging machine to complete the following:
the set up and application of at least one edge treatment material
the identification and correction of at least two real or simulated machining faults
Conduct operator maintenance on the machine and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource implications
Access to a semi-automated or automated tape edging machine, including tooling equipment and accuracy devices.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Identify, set up and operate a semi-automated or automated tape edging machine to complete the following:
the set up and application of at least one edge treatment material
the identification and correction of at least two real or simulated machining faults
Conduct operator maintenance on the machine and equipment
Work effectively with others
Modify activities to cater for variations in workplace context and environment
Resource implications
Access to a semi-automated or automated tape edging machine, including tooling equipment and accuracy devices.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0348 | LMFMB3003A | Set up, operate and maintain a tape edging machine | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI577 | MSFMB2006 | Set up, operate and maintain a tape edging machine | Unit of competency |
