Unit of competency Outline

Date retreived
22/07/2026 8:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and replace vehicle structural damage

Repair and replace vehicle structural damage

Unit of competency
National Code
AURVTN018
State Code
AWZ78
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
58
Description
This unit describes the performance outcomes required to repair the structural damage of vehicle body components using straightening and replacement techniques. It involves preparing for the task, selecting and using specialist tools and equipment, fitting, aligning and welding structural sections, finishing repairs to pre-paint condition, undertaking a final inspection of body repair work, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair and replace vehicle structural damage
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Structural repair and replacement information is accessed and interpreted from original equipment manufacturer (OEM) or authorised agency’s specifications
  • 1.3 Materials for repair are selected and checked for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are selected and checked for serviceability
  • 1.6 Work is planned to identify methods, minimise waste, and use time efficiently
2. Carry out structural straightening, realigning and welding procedures
  • 2.1 Damaged components are removed as required, according to OEM or authorised agency’s recommended procedures and equipment
  • 2.2 Components are straightened using OEM or authorised agency’s approved equipment and procedures
  • 2.3 Repaired or replacement components are fitted and aligned, and measurements are checked against OEM or authorised agency’s specifications
  • 2.4 Repaired or replaced components are welded according to OEM or authorised agency’s specifications, methods and equipment, and safety and environmental requirements
  • 2.5 Assistance is sought from authorised personnel where straightening, realigning and welding of components disturb vehicle trim or electrical, mechanical or air conditioning systems
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF504 AURVTN3018 Repair and replace structural damage by welding Unit of competency