Unit of competency Outline
Date retreived
22/07/2026 10:31 AM AWST
22/07/2026 10:31 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Move materials mechanically using automated equipment
Move materials mechanically using automated equipment
Unit of competency
National Code
TLID2013
TLID2013
State Code
AWM73
AWM73
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
04/08/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/08/2016
Nominal Hours
40
Description
This unit involves the skills and knowledge required to move materials mechanically using automated equipment such as automatic guided vehicles, tow motors, low level order pickers, conveyor systems and mechanised pallet movers.It includes selecting appropriate mechanical moving equipment, moving materials/goods in accordance with operational requirements, checking condition of materials/goods and completing all required documentation.Work must be carried out in compliance with relevant work health and safety (WHS)/occupational health and safety (OHS) regulations concerning moving materials mechanically using automated equipment.Work is performed under limited or minimum supervision. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Select load moving equipment
- 1.1 Mechanised handling equipment, route to be taken and procedures to be used are selected appropriate to goods characteristics
- 1.2 Dangerous goods and hazardous materials are identified and handled in accordance with codes of practice, WHS/OHS requirements and workplace procedures
2 Move goods
- 2.1 Hazards are identified, risks are assessed and control measures are implemented
- 2.2 Goods are moved using selected materials handling equipment in accordance with WHS/OHS regulations, manufacturer instructions and workplace procedures
- 2.3 Problems moving goods and materials using automated equipment are identified and reported in accordance with workplace procedures
3 Check goods and complete documentation
- 3.1 Relocated goods are inspected for possible damage during transit/movement and appropriate action is taken
- 3.2 Appropriate documentation is completed to track moved goods in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D5068 | TLID2013A | Move materials mechanically using automated equipment | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBR14 | TLID0006 | Move materials mechanically using automated equipment | Unit of competency |