Identify and repair high strength steel vehicle components

Unit of competency Outline

Date retreived
22/07/2026 9:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
AURVTN128

State Code
OCK31

TGA Status
Current

DTWD Status
Approved

Current Release Number
1.00

Current Release Date
13/11/2020

View on TGA

State Implementation and Classification

Approved Date

31/03/2021

Field of Education

030503 - Vehicle Mechanics

Original Release Date

31/03/2021

Nominal Hours

Description

This unit describes the knowledge and skills required to locate, identify and repair high strength steel (HSS) vehicle components, including advanced and ultra-high strength steel. This unit involves preparing for the task, selecting and using specialist tools and equipment, confirming recommended repair procedure from original equipment manufacturer (OEM) or authorised agency. It also includes selecting repair procedures and recommended welding method, removing and replacing HSS components, finishing HSS repairs to pre-paint condition, and completing workplace processes and documentation.The unit applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1. Locate OEM or authorised agency repair procedures

1.1 Determine job requirements from workplace instructions
1.2 Source, interpret and incorporate OEM or authorised agency repair procedures into planning process
1.3 Identify hazards associated with the work and manage risks
1.4 Select and check required repair tools and equipment and personal protective equipment (PPE) for serviceability
1.5 Plan work to identify required HSS repair methods, minimise waste, and use time efficiently

2. Repair or replace HSS components

2.1 Protect sections not subject to repair, using approved methods and equipment
2.2 Identify and remove HSS sections to be replaced using OEM or authorised agency required removal methods and equipment, workplace procedures, and safety and environmental requirements
2.3 Restore damaged surfaces to a condition suitable for fitting replacement HSS components
2.4 Use vehicle measuring or jigging equipment to position replacement HSS component according to OEM or authorised agency specifications
2.5 Protect or reapply OEM or authorised agency’s surface coatings
2.6 Align and secure replacement HSS components within OEM or authorised agency’s tolerances

3. Weld HSS components

3.1 Locate and check recommended welding equipment for HSS for operation
3.2 Conduct sample welds using recommended repair methods, and inspect and destruction test for defects according to workplace instruction
3.3 Refit HSS components using recommended repair methods, materials and equipment, and without causing damage to other systems or components
3.4 Follow grinding procedures according to OEM or authorised agency and weld material specifications

4. Complete work processes

4.1 Finish repairs to HSS components to pre-paint condition according to workplace and OEM or authorised agency repair procedures
4.2 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
4.3 Clear work area and dispose of or recycle materials according to workplace procedures
4.4 Complete documentation according to workplace procedures

No information

Replaces

State Code	National Code	Title	Type
AWZ68	AURVTN028	Identify and repair high strength steel vehicle components	Unit of competency

State Code	National Code	Title	Type
BFY1	AUR32120	Certificate III in Automotive Body Repair Technology	Qualification