Unit of competency Outline

Date retreived
23/07/2026 7:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Identify and repair high strength steel vehicle components

Identify and repair high strength steel vehicle components

Unit of competency
National Code
AURVTN028
State Code
AWZ68
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
40
Description
This unit describes the performance outcomes required to locate, identify and repair high strength steel (HSS) vehicle components, including advanced and ultra-high strength steel. It involves preparing for the task, selecting and using specialist tools and equipment, confirming recommended repair procedure from original equipment manufacturer (OEM) or authorised agency, selecting repair procedures and recommended welding method, removing and replacing HSS components, finishing HSS repairs to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Locate OEM or authorised agency repair procedures
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 OEM or authorised agency repair procedures are sourced, interpreted and incorporated into planning process
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Recommended repair tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Work is planned to identify required HSS repair methods, minimise waste, and use time efficiently
2. Repair or replace HSS components
  • 2.1 Sections not subject to repair are protected, using approved methods and equipment
  • 2.2 HSS sections to be replaced are identified and removed using OEM or authorised agency recommended removal methods and equipment, workplace procedures, and safety and environmental requirements
  • 2.3 Damaged surfaces are restored to a condition suitable for fitting replacement HSS components
  • 2.4 Vehicle measuring or jigging equipment is used to position replacement HSS component correctly according to OEM or authorised agency specifications
  • 2.5 OEM or authorised agency’s surface coatings is protected or reapplied
  • 2.6 Replacement HSS components are aligned and secured within OEM or authorised agency’s tolerances
3. Weld HSS components
  • 3.1 Recommended welding equipment for HSS is located and checked for correct operation
  • 3.2 Sample welds are conducted using recommended welding techniques, inspected, and destruction tested for defects according to workplace instructions
  • 3.3 HSS components are refitted using recommended repair methods, materials and equipment, and without causing damage to other systems or components
  • 3.4 Grinding procedures are followed according to OEM or authorised agency and weld material specifications
4. Complete work processes
  • 4.1 Repairs to HSS components are finished to pre-paint condition according to workplace and OEM or authorised agency repair procedures
  • 4.2 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and components are presented ready for painting
  • 4.3 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.4 Tools and equipment are checked, tagged and reported if faulty, and stored according to workplace procedures
  • 4.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF514 AURVTN3028 Identify and repair high strength steel components Unit of competency
Replaced By
State Code National Code Title Type
OCK31 AURVTN128 Identify and repair high strength steel vehicle components Unit of competency