Unit of competency Outline

Date retreived
22/07/2026 10:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Lay on tyre retreads

Lay on tyre retreads

Unit of competency
National Code
PMBPROD325E
State Code
ODA60
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030503 - Vehicle Mechanics
Original Release Date
19/05/2021
Nominal Hours
26
Description
This unit covers the skills and knowledge required to lay retread onto prepared tyre casings. It applies to ‘green’ retread that requires mould curing and pre-cured retread.This unit applies to an individual working alone or as part of a team.The unit principally refers to the practical, theoretical and technical knowledge and well-developed skills required in situations that require some discretion and judgement.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Plan work requirements
  • 1.1 Identify materials required from job specifications
  • 1.2 Identify equipment and processes required for production and upstream and downstream operations from job specifications
  • 1.3 Perform pre-operational checks including checking for and controlling hazards
  • 1.4 Identify checks and testing processes required for materials, quality, production management and equipment to meet job requirements
  • 1.5 Perform housekeeping tasks in preparation for work to be undertaken
  • 1.6 Identify waste management strategies to collect excess, discarded or nonconforming materials to be disposed of, recycled or reprocessed according to workplace procedures
2. Perform pre-production tasks
  • 2.1 Set production process according to equipment and workplace specifications, and adjust process to optimise output
  • 2.2 Verify materials are correct against job specifications
  • 2.3 Set up date, batch and materials markings according to workplace procedures
  • 2.4 Undertake other pre-startup checks according to equipment specifications and workplace procedures
3. Operate and make adjustments to the retread laying process
  • 3.1 Start up and operate retread laying process, and make adjustments to settings to meet job specifications
  • 3.2 Ensure process is operating according to equipment specifications and workplace procedures
  • 3.3 Follow checking and testing processes to assess if output meets job specifications and quality standards, and apply strategies for managing non-conforming outputs
  • 3.4 Maintain continuity of process to support production
  • 3.5 Accurately complete logs and records
  • 3.6 Work efficiently to minimise scrap and trim according to workplace procedures
  • 3.7 Clean work area, and clean, adjust and lubricate equipment according to equipment specifications and workplace procedures
  • 3.8 Pause or stop process in normal and abnormal circumstances according to workplace procedures
4. Shut down equipment to procedures
  • 4.1 Determine type of shutdown and the process to be followed from equipment instructions and workplace procedures
  • 4.2 Shut down equipment according to equipment instructions and workplace procedures
  • 4.3 Complete equipment clean-up and post-production adjustments according to equipment instructions
  • 4.4 Put guards, locks and notices in place to prevent inadvertent startup
  • 4.5 Accurately complete workplace documentation
  • 4.6 Clean and clear work area after the shutdown in readiness for the next startup
5. Anticipate and solve process control variances
  • 5.1 Recognise existing or potential process control variances and their causes
  • 5.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 5.3 Monitor process control variances and corrective actions taken until resolved
  • 5.4 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAI59 PMBPROD325 Lay on tyre retreads Unit of competency