Lay on tyre retreads

Unit of competency Outline

Date retreived
22/07/2026 11:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
PMBPROD325

State Code
BAI59

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
22/06/2016

View on TGA

State Implementation and Classification

Approved Date

05/08/2016

Field of Education

030503 - Vehicle Mechanics

Original Release Date

05/08/2016

Nominal Hours

Description

This unit of competency covers the skills and knowledge required to lay retread onto prepared tyre casings. It applies to ‘green’ retread that requires mould curing and pre-cured retread.This unit of competency applies to experienced operators who are required to start up and shut down retread laying equipment, monitor equipment and process operation, establish a stable process, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The advanced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1 Plan own work requirements

1.1 Identify the most appropriate equipment to be used for production and upstream and downstream operations from production plan or request
1.2 Identify and check materials required
1.3 Implement measures to control identified hazards in line with procedures and duty of care
1.4 Identify requirements for materials, quality, production and equipment checks

2 Start up retread laying process to procedures

2.1 Identify process settings required for product
2.2 Set process to required settings
2.3 Check materials are correct
2.4 Take appropriate action for non-conforming materials
2.5 Set up date, batch and materials markings to specifications, as required
2.6 Complete pre-start checks
2.7 Start up retread laying process

3 Operate and make adjustments to the retread laying process to procedures

3.1 Operate retread laying process, noting key variables
3.2 Monitor product/process quality
3.3 Make adjustments to remedy faults and non-conformity as required
3.4 Establish a stable retread laying process
3.5 Adjust process to minimise scrap and trim
3.6 Clean, adjust and lubricate equipment as required

4 Shut down equipment to procedures

4.1 Determine type of shutdown
4.2 Leave machine in appropriate condition and with appropriate locks, tags or notices
4.3 Complete relevant documentation
4.4 Ensure area is clean and clear after the shutdown, in readiness for the next start-up

5 Anticipate and solve problems

5.1 Recognise a problem or a potential problem
5.2 Determine problems needing priority action
5.3 Refer problems outside area of responsibility to appropriate person, with possible causes
5.4 Seek information and assistance as required to solve problems
5.5 Solve problems within area of responsibility
5.6 Follow through items initiated until final resolution has occurred

No information

Replaces

State Code	National Code	Title	Type
W7637	PMBPROD325B	Lay on tyre retreads	Unit of competency

Replaced By

State Code	National Code	Title	Type
ODA60	PMBPROD325E	Lay on tyre retreads	Unit of competency

State Code	National Code	Title	Type
BCT3	PMB30116	Certificate III in Polymer Processing	Qualification
BCU0	PMB40116	Certificate IV in Polymer Technology	Qualification