Unit of competency Outline

Date retreived
22/07/2026 9:42 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and produce hand-fastened product

Set up and produce hand-fastened product

Unit of competency
National Code
ICPCBF263
State Code
AUO59
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
26/03/2015
View on TGA
State Implementation and Classification
Approved Date
16/09/2015
Field of Education
030103 - Printing
Original Release Date
16/09/2015
Nominal Hours
40
Description
This unit describes the skills and knowledge required to set up and produce hand-fastened product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Job specifications are read and interpreted from job documentation or production control system
  • 1.2 Set-up is carried out correctly in minimum time with minimum wastage
  • 1.3 Availability of all job related components is checked
  • 1.4 Fastening system is set up and adjusted according to job specifications
2. Conduct sample run
  • 2.1 Raw material to be used for sample is organised correctly
  • 2.2 Equipment is set up and operated to produce a specified sample according to work health and safety requirements, manufacturer’s specifications and enterprise procedures
  • 2.3 Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
  • 2.4 Results are interpreted to determine adjustment requirements
  • 2.5 Adjustments are carried out according to product and equipment specifications
3. Maintain basic fastening process
  • 3.1 Fastening process is monitored and adjusted to ensure quality product is achieved
4. Maintain production process
  • 4.1 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  • 4.2 Production is maintained according to WHS requirements, manufacturer’s specifications and enterprise procedures
  • 4.3 Performance is monitored and verified using the process control system according to enterprise procedures
  • 4.4 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  • 4.5 Process adjustments to eliminate problems are reported according to enterprise procedures
  • 4.6 Faulty performance of equipment is identified and reported according to enterprise procedures
  • 4.7 Waste is sorted according to enterprise procedures
5. Identify and rectify problems and faults
  • 5.1 Problems fastening (adhesive/mechanical) equipment are identified and reported according to enterprise procedures
  • 5.2 Adjustments or corrections are carried out according to specified procedures and are consistent with operator’s skill level
  • 5.3 Fastening (adhesive/mechanical) equipment operation is checked to ensure correct operation
6. Clean fastening equipment
  • 6.1 Mechanical fastening unit is disengaged and cleaned ready for next run
OR
  • 6.2 Glue system is washed ready for next run, and liquid waste is disposed of according to regulatory requirements and enterprise procedures
  • 6.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  • 6.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  • 6.5 Repair/adjustment is verified prior to resumption of operations
  • 6.6 Production records or other documentation are accurately completed, where required by enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D3036 ICPCF263C Set up and produce hand-fastened product Unit of competency
Replaced By
State Code National Code Title Type
OBP42 ICPCBF2630 Set up and produce hand-fastened product Unit of competency
State Code National Code Title Type
AWB3 ICP20115 Certificate II in Printing and Graphic Arts (General) Qualification