Unit of competency Outline

Date retreived
22/07/2026 10:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up and produce hand-fastened product

Set up and produce hand-fastened product

Unit of competency
National Code
ICPCBF2630
State Code
OBP42
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
40
Description
This unit describes the skills and knowledge required to set up and produce hand-fastened product.It applies to individuals in the printing and graphic arts industry who set up for and produce hand-fastened product to meet production requirements. They generally work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Read and interpret job specifications from job documentation and production control system
  • 1.2 Identify and undertake machine requirements for set-up
  • 1.3 Check availability of all job related components
  • 1.4 Set up and adjust fastening system to job specifications
2. Conduct sample run
  • 2.1 Prepare raw material to be used for sample
  • 2.2 Set up and operate equipment to produce a specified sample according to work health and safety requirements, manufacturer specifications and enterprise procedures
  • 2.3 Inspect sample and identify requirements for and organise testing according to enterprise procedures
  • 2.4 Interpret results to determine adjustment requirements
  • 2.5 Carry out adjustments according to product and equipment specifications
3. Maintain production process
  • 3.1 Fastening process is monitored and adjusted to ensure quality product is achieved
  • 3.2 Monitor and verify performance using the process control system according to enterprise procedures
  • 3.3 Identify and report faulty performance of equipment according to enterprise procedures
  • 3.4 Carry out adjustments and corrections according to specified procedures and within scope of own role
4. Conduct shutdown of production process
  • 4.1 Clean and disengage machinery and equipment ready for next run
  • 4.2 Remove substrate waste from operating area and recycle and dispose of, where required, according to regulatory requirements and enterprise procedures
  • 4.3 Identify machine faults requiring repair and reported to designated person according to enterprise procedures
  • 4.4 Verify repairs and adjustments prior to resumption of operations
  • 4.5 Complete production records and other documentation according to enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUO59 ICPCBF263 Set up and produce hand-fastened product Unit of competency
State Code National Code Title Type
BFC3 ICP20120 Certificate II in Printing and Graphic Arts Qualification