Unit of competency Outline

Date retreived
23/07/2026 2:20 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply heat induction processes

Apply heat induction processes

Unit of competency
National Code
AURTTA020
State Code
AXA95
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030509 - Automotive Body Construction
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to apply heat using induction processes when repairing vehicle chassis and components. It involves preparing for the task, selecting and using specialist tools and equipment, identifying damage, operating heat induction equipment according to manufacturer specifications, completing repairs to original equipment manufacturer (OEM) or authorised agency’s specifications, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to apply heat induction processes in repairs of vehicle chassis and components
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Repair information is accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and inspected for serviceability
  • 1.5 Work area is prepared and work planned in line with job requirements, heating sequence, and workplace procedures
2. Carry out heat induction processes
  • 2.1 Heat induction settings are identified and adjusted, and equipment is operated according to OEM or authorised agency specifications and workplace procedures
  • 2.2 Induction heating activities to repair damaged chassis and components are completed according to OEM or authorised agency specifications, workplace procedures, and safety and environmental requirements, and without causing damage to workplace equipment, vehicle systems or other components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Equipment maintenance activities are completed according to workplace procedures and equipment manufacturer specifications
  • 3.5 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF387 AURTTA3020 Apply heat-induction processes Unit of competency