Unit of competency Outline

Date retreived
22/07/2026 10:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform routine machine setting

Perform routine machine setting

Unit of competency
National Code
MEM07003
State Code
OAW51
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
26/06/2019
View on TGA
State Implementation and Classification
Approved Date
24/01/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
24/01/2020
Nominal Hours
36
Description
This unit of competency defines the skills and knowledge required to set a range of non-numerical control (NC) and non-computer numerical control (CNC) equipment, including manual, semi-automatic and automatic machines. Where setting skills for NC/CNC is required unit MEM07015 Set computer controlled machines and processes should also be selected.Where setting automated assembly processes is required unit MEM07040 Set multistage integrated processes should also be selected. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, job sheets or work instructions
2 Set machine
  • 2.1 Set up machine in accordance with defined procedures
  • 2.2 Adjust machine to meet specifications and operational requirements
  • 2.3 Measure first-off samples for compliance with specifications
  • 2.4 Identify worn or damaged tooling and change, as required
  • 2.5 Instruct machine operator, if necessary, on sequencing settings and any required safety procedures
No information
No information
Replaces
State Code National Code Title Type
W5382 MEM07003B Perform machine setting (routine) Unit of competency