Unit of competency Outline

Date retreived
22/07/2026 9:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare machine for operation (basic)

Prepare machine for operation (basic)

Unit of competency
National Code
ICPSUP2070
State Code
OBQ66
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to prepare printing and finishing machines and assist with their operation according to enterprise procedures. It applies to individuals who undertake machine-minding duties in a production environment, as well as off-siders assisting in the operation of a machine. They mainly work under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for job
  • 1.1 Identify job specifications
  • 1.2 Locate, check and prepare product according to job specifications
  • 1.3 Identify and remove faulty material according to enterprise procedures and work health and safety (WHS) requirements
  • 1.4 Set up and adjust delivery systems
2. Prepare machine
  • 2.1 Set up machine according to job specifications
  • 2.2 Load inks, glues, liquid and other materials as required according to manufacturer specifications and enterprise procedures
  • 2.3 Install plates, cutting and other devices as required
  • 2.4 Confirm required registration, alignment and centring
  • 2.5 Run machine through cycle and confirm required substrate and product position
  • 2.6 Report readiness of machine according to enterprise procedures for final adjustments and proofing by designated person
3. Conduct shutdown of production process
  • 3.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 3.2 Store unused materials
  • 3.3 Remove and store used plates, cutting and other devices
  • 3.4 Remove all product from operating area according to enterprise procedures and WHS requirements
  • 3.5 Identify machine faults requiring repair and reported to designated person according to enterprise procedures
  • 3.6 Verify repairs and adjustments as required prior to resumption of operations
  • 3.7 Clean and disengage all required parts of machinery used in printing process
No information
No information
Replaces
State Code National Code Title Type
AUM68 ICPSUP207 Prepare machine for operation (basic) Unit of competency