Unit of competency Outline
Date retreived
22/07/2026 1:55 PM AWST
22/07/2026 1:55 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Inspect pre-packed articles
Inspect pre-packed articles
Unit of competency
National Code
MEM15016B
MEM15016B
State Code
W5524
W5524
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
11/09/2006
Field of Education
080317 - Quality Management
Original Release Date
11/09/2006
Nominal Hours
72
Description
This unit cover performing trade measurement inspection activities in trading environments. The unit covers the competency required to undertake examination of pre-packed articles in relation to measurement.
Notes
Elements and Performance Criteria
1. Explain the requirements of trade measurement legislation relating to pre-packed articles
- 1.1. Legislative requirements that apply to pre-packed articles are explained.
- 1.2. Approved markings as they apply to all pre-packed articles intended for sale are described.
2. Inspect pre-packed articles for compliance with marking requirements
- 2.1. Pre-packed articles are examined for the marking of quantity statements and unit pricing in accordance with legislative requirements.
- 2.2. Pre-packed articles are examined for the marking of packer identification.
- 2.3. Results of examination are documented for further action.
3. Measure pre-packed articles
- 3.1. Articles are selected for check measuring in accordance with marketplace intelligence, legislative requirements and organisational procedures.
- 3.2. Product handling and disposal requirements are assessed and complied with in accordance with workplace, health and safety requirements, environmental considerations and public sector auditor's requirements.
- 3.3. Specialised equipment and measuring devices are selected in accordance with organisational procedures.
- 3.4. Articles are check measured in accordance with organisation's procedures to determine compliance with legislation.
- 3.5. Results of check measurements are documented for further action.
4. Finalise inspection and take appropriate action
- 4.1. Trading practice information relevant to the inspection is communicated to the trader.
- 4.2. Approved procedures to remedy non-compliance are determined and applied,
- 4.3. Inspection documentation is completed in accordance with organisational procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Legislation requirements and policy guidelines
Enabling legislation, organisational policies and procedures - workplace, health and safety, environmental legislation, enforcement policies, auditor's instructions
Workplace, health and safety requirements
Storage of test equipment, site/premise conditions, handling of dangerous materials, safety clothing, manual handling techniques, product disposal, transportation of test equipment
Environmental considerations
Disposal of hazardous materials, weather conditions, storage methods and conditions
Specialist equipment and measuring devices
Reference standards and test equipment, safety equipment, product handling equipment, measuring equipment
Inspection documentation
Organisational forms, notices, field books, product handling sheets, evaluation form or report
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Legislation requirements and policy guidelines
Enabling legislation, organisational policies and procedures - workplace, health and safety, environmental legislation, enforcement policies, auditor's instructions
Workplace, health and safety requirements
Storage of test equipment, site/premise conditions, handling of dangerous materials, safety clothing, manual handling techniques, product disposal, transportation of test equipment
Environmental considerations
Disposal of hazardous materials, weather conditions, storage methods and conditions
Specialist equipment and measuring devices
Reference standards and test equipment, safety equipment, product handling equipment, measuring equipment
Inspection documentation
Organisational forms, notices, field books, product handling sheets, evaluation form or report
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to inspect pre-packed articles. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with inspecting pre-packed articles, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to inspect pre-packed articles. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with inspecting pre-packed articles, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M1785 | MEM15.16AA | Inspect pre-packed articles | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEU11 | MEM15016 | Inspect pre-packed articles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEJ8 | MEM40119 | Certificate IV in Engineering | Qualification |
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| BEK0 | MEM50119 | Diploma of Engineering - Advanced Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |