Unit of competency Outline

Date retreived
22/07/2026 10:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain spray equipment and booth

Maintain spray equipment and booth

Unit of competency
National Code
MSFFF2013
State Code
OEL67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
24
Description
This unit describes the skills and knowledge required to strip, clean, restore and service spray equipment and booths.Workers with this competency undertake entry-level work under supervision in the furnishing industry.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements, including timings, equipment to be maintained, materials and efficient work methods, from work documentation
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Identify materials, tools, equipment and accessories and check for safe and effective operation
  • 1.4 Clear work area of unwanted stock, products and materials in accordance with workplace procedures
  • 1.5 Isolate equipment from power sources and make safe in accordance with workplace procedures
2 Maintain the equipment
  • 2.1 Dismantle equipment in accordance with manufacturer specifications and workplace procedures
  • 2.2 Lay out components in a logical re-assembly sequence
  • 2.3 Clean and service components using authorised materials, tools and equipment
  • 2.4 Inspect components and repair or replace faulty items or refer them for further maintenance action
  • 2.5 Re-assemble equipment and perform operational tests
  • 2.6 Record and report on equipment maintenance in accordance with workplace procedures
3. Maintain booths
  • 3.1 Neutralise sources of combustion and ignition throughout the work sequence
  • 3.2 Inspect and clean out ventilation and other services and replenish, replace or refer for required further maintenance action
  • 3.3 Clean and restore surfaces and floors in accordance with workplace procedures and standards
  • 3.4 Clean and restore materials and consumable stores in accordance with workplace procedures and standards
No information
No information
Replaces
State Code National Code Title Type
WI317 MSFFF2005 Maintain spray equipment and booth Unit of competency