Unit of competency Outline

Date retreived
22/07/2026 8:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain spray equipment and booth

Maintain spray equipment and booth

Unit of competency
National Code
MSFFF2005
State Code
WI317
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
17/03/2014
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
24
Description
This unit of competency covers stripping, cleaning, restoring and servicing spray equipment and booths.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements, including timings, equipment to be maintained and materials
  • 1.2 Work health and safety (WHS) requirements, including ventilation and personal protection needs, are observed throughout the work
  • 1.3 Tools, equipment and accessories are identified and checked for safe and effective operation
  • 1.4 Work area is cleared of unwanted stock, products and materials
  • 1.5 Equipment is isolated from power sources and made safe in accordance with site procedures
2 Maintain the equipment
  • 2.1 Equipment is dismantled in accordance with manufacturer specifications and site procedures
  • 2.2 Components are laid out in a logical re-assembly sequence
  • 2.3 Components are cleaned and serviced using authorised materials and tools/equipment
  • 2.4 Components are inspected and faulty items repaired, replaced or referred for further maintenance action
  • 2.5 Equipment is re-assembled and operations are tested
  • 2.6 Equipment maintenance is reported/recorded in accordance with site procedures
3 Maintain booths
  • 3.1 Combustion and ignition sources are neutralised throughout the work sequence
  • 3.2 Ventilation and other services are inspected for operation, cleaned out and, where appropriate, replenished, replaced or referred for further maintenance action
  • 3.3 Surfaces and floors are cleaned and restored in accordance with site and industry standards
  • 3.4 Materials and consumable stores are cleaned and restored in accordance with site, industry and regulatory standards
No information
No information
Replaces
State Code National Code Title Type
W8510 LMFFF2005B Maintain spray equipment and booth Unit of competency
Replaced By
State Code National Code Title Type
OEL67 MSFFF2013 Maintain spray equipment and booth Unit of competency
State Code National Code Title Type
J726 MSF20213 Certificate II in Furniture Finishing Qualification
J729 MSF30113 Certificate III in Furniture Finishing Qualification