Unit of competency Outline
Date retreived
22/07/2026 1:14 PM AWST
22/07/2026 1:14 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain spray equipment and booth
Maintain spray equipment and booth
Unit of competency
National Code
LMFFF2005B
LMFFF2005B
State Code
W8510
W8510
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
19/09/2008
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/09/2008
Nominal Hours
24
Description
This unit covers the competency to strip, clean, restore and service spray equipment and booths.
Notes
Elements and Performance Criteria
1. Prepare for work
- 1.1. Work instructions are used to determine job requirements, including timings, equipment to be maintained and materials
- 1.2. OHS requirements, including ventilation and personal protection needs, are observed throughout the work
- 1.3. Tools, equipment and accessories are identified and checked for safe and effective operation
- 1.4. Work area is cleared of unwanted stock, products and materials
- 1.5. Equipment is isolated from power sources and made safe in accordance with site procedures
2. Maintain the equipment
- 2.1. Equipment is dismantled in accordance with manufacturers' specifications and site procedures
- 2.2. Components are laid out in a logical reassembly sequence
- 2.3. Components are cleaned and serviced using authorised materials and tools/equipment
- 2.4. Components are inspected and faulty items repaired, replaced or referred for further maintenance action
- 2.5. Equipment is reassembled and operations are tested
- 2.6. Equipment maintenance is reported/recorded in accordance with site procedures
3. Maintain booths
- 3.1. Combustion and ignition sources are neutralised throughout the work sequence
- 3.2. Ventilation and other services are inspected for operation, cleaned out and, where appropriate, replenished, replaced or referred for further maintenance action
- 3.3. Surfaces and floors are cleaned and restored in accordance with site and industry standards
- 3.4. Materials and consumable stores are cleaned and restored in accordance with site, industry and regulatory standards
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Spray equipment may include:
computerised spray system
electrostatic spray gun
powder coating spray gun
air compressor and hoses and dryers
Booths
Booths is a generic term for areas specifically used for the hand or mechanical application of coatings/paint. They may range from a dry filter bath to a purpose-designed, positive-pressure, down-draft water booth
Booth services may include:
lighting
ventilation
electricity supply
water supply
paint lines
consumables storage areas
Tools and equipment may include:
liquid containers
feeding systems
spray guns
scrapers (non-ferrous) screwdrivers
shifting spanner
spanners
Materials to be used may include are not limited to:
water
solvents
other cleaning compounds and chemicals
rags
steel wool
brushes
hoses
brooms
squeegees
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
OHS requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods codes and local safe operating procedures
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Spray equipment may include:
computerised spray system
electrostatic spray gun
powder coating spray gun
air compressor and hoses and dryers
Booths
Booths is a generic term for areas specifically used for the hand or mechanical application of coatings/paint. They may range from a dry filter bath to a purpose-designed, positive-pressure, down-draft water booth
Booth services may include:
lighting
ventilation
electricity supply
water supply
paint lines
consumables storage areas
Tools and equipment may include:
liquid containers
feeding systems
spray guns
scrapers (non-ferrous) screwdrivers
shifting spanner
spanners
Materials to be used may include are not limited to:
water
solvents
other cleaning compounds and chemicals
rags
steel wool
brushes
hoses
brooms
squeegees
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures
Workplace procedures relating to tools and equipment
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Manufacturer specifications and operational procedures
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply information relevant to the spray equipment and booth services
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required standards and quality
Disassemble, maintain and reassemble at least two different spray systems
Maintain a booth and booth services on at least two occasions
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment.
Resource Implications
Spray systems and equipment, spray booth, cleaning and maintenance materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence
Locate, interpret and apply information relevant to the spray equipment and booth services
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self or others
prevent damage to goods, equipment or products
maintain required standards and quality
Disassemble, maintain and reassemble at least two different spray systems
Maintain a booth and booth services on at least two occasions
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment.
Resource Implications
Spray systems and equipment, spray booth, cleaning and maintenance materials.
Method of Assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other relevant units of competency.
Context of Assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0257 | LMFFF2005A | Maintain spray equipment and booth | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI317 | MSFFF2005 | Maintain spray equipment and booth | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W030 | LMF30202 | Certificate III in Furniture Finishing | Qualification |