Unit of competency Outline
Date retreived
22/07/2026 6:48 AM AWST
22/07/2026 6:48 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain and monitor wind farm civil assets
Maintain and monitor wind farm civil assets
Unit of competency
National Code
UEPMNT370
UEPMNT370
State Code
OAH94
OAH94
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
031399 - Electrical And Electronic Engineering And Technology, N.e.c.
Original Release Date
15/05/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to condition, monitor and conduct preventative and remedial maintenance to ensure the integrity of civil assets associated with a wind farm.Civil assets include infrastructuresuch as water treatment facilities, sewer pipelines, roads, utility grids, bridges, tunnels and railways. Maintenance involves the use of strategies and procedures to preserve and extend the service life of civil asset infrastructure at a wind farm.Competency in this unit requires the ability to plan work, disassemble wind turbine, inspect wind turbine components, repair wind turbine and/or components and report on all completed work tasks. Individuals will, in general, work under supervision in a maintenance operative in a power generation facility.Power generation maintenance personnel are typically trained and authorised to receive permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for the work
- 1.1 Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
- 1.2 Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
- 1.3 Resources are obtained and inspected for compliance, in accordance with workplace procedures
- 1.4 Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
- 1.5 Work is planned sequenced and prioritised, in accordance with workplace procedures
2 Monitor civil assets
- 2.1 Inspection of civil assets is completed, in accordance with workplace procedures
- 2.2 Inspection results are reported, in accordance with workplace procedures
- 2.3 Defects are reported, in accordance with workplace procedures
3 Maintain civil assets
- 3.1 Maintenance work on civil assets is undertaken, in accordance with workplace procedures and site requirements
- 3.2 Tools and equipment to maintain civil assets are utilised, in accordance with manufacturers' specifications and job requirements.
- 3.3 Defects are repaired, in accordance with workplace procedures
4 Complete work
- 4.1 Work is completed and appropriate personnel are notified, in accordance with workplace procedures
- 4.2 Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
- 4.3 Tools and equipment are maintained, in accordance with manufacturers' specifications and workplace procedures
- 4.4 Work completion details are finalised, in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WG170 | UEPMNT370A | Maintain and monitor wind farm civil assets | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| ODY38 | UEPMNT008 | Maintain and monitor wind farm civil assets | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEB5 | UEP40618 | Certificate IV in Large Scale Wind Generation - Electrical | Qualification |