Qualification Outline

Date retreived
22/07/2026 4:24 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in Large Scale Wind Generation - Electrical

Certificate IV in Large Scale Wind Generation - Electrical

Qualification
National Code:
UEP40618
State Code:
BEB5
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0313 - Electrical And Electronic Engineering And Technology
Original TGA Release Date
31/10/2018
Approved Date
15/05/2019
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
C
Nominal Hours
1152
Duration
2 Semesters
Current Release Number
1.00
Current Release Date
31/10/2018
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
1.00 31/10/2018 Current Pending
Description

Participants gaining this qualification will be able to operate, test, find and diagnose faults and alter and repair electrical equipment and systems associated with large scale wind power generation. It may also include the supervision of others and the coordination of work activities.
This qualification may meet the requirements for a Restricted Electricians Licence (Electrical Fitter). Licensing requirements should be confirmed with the relevant state/territory licensing and regulatory authorities.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
>>

Schedule
Packaging Rules
A total 1280 weighting points comprising 900 core weighting points, plus 380 elective weighting points from the general elective units listed below.

- Choose a total of 380 weighting point from the general elective units list below of which between zero (0) and sixty (60) weighting points can be taken from Group A. A total of 120 weighting points can be selected from Group B. Between 260 and 380 weighting points may be taken from Group C, you may select all your elective units from this group.

- Up to sixty (60) weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided that selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in UEP CVIG, if not listed weighting points will be ten (10) points unless directed from the ESI Generation Industry Reference Committee (IRC). The general elective units must contribute to the vocational outcomes of the qualification.

Where imported units are selected, care must be taken to ensure that all prerequisite units specified are complied with.

Where a prerequisite unit is attached to a unit, it is identified by this symbol ∟.
1. Core Units

All twenty one (21) units, totaling 900 points, must be completed.

State Code National Code Title Hours Type
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7317 UEENEEG063A Arrange circuits, control and protection for general electrical installations 36 Unit of competency
OAI32 UEPMNT202 Carry out routine work activities in an ESI large scale wind generation environment 18 Unit of competency
WC530 UEENEEG199A Conduct compliance and functional verification of electrical apparatus and existing circuits 36 Unit of competency
S7326 UEENEEG109A Develop and connect electrical control circuits 72 Unit of competency
S7314 UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
WC714 UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures 18 Unit of competency
WC423 UEENEEE117A Implement and monitor energy sector OHS policies and procedures 18 Unit of competency
OAH92 UEPMNT371 Maintain large scale wind turbine generators 54 Unit of competency
W7839 UEENEEE038B Participate in development and follow a personal competency development plan 18 Unit of competency
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7316 UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits 54 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7325 UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
WC453 UEENEEE185A Write work activity reports 18 Unit of competency
2. Group A Elective Units

A maximum of 60 weighting points may be chosen from Group A.
Please refer to TGA for a full list of unit weighting points.

State Code National Code Title Hours Type
W7811 UEENEEE009B Comply with scheduled and preventative maintenance program processes 18 Unit of competency
W7740 UEENEEC010B Deliver a service to customers 18 Unit of competency
W7731 UEENEEC001B Maintain documentation 18 Unit of competency
WC385 UEENEED101A Use computer applications relevant to a workplace 18 Unit of competency
3. Group B Elective Units

A maximum of 120 weighting points may be chosen from Group B.
Please refer to TGA for a full list of unit weighting points.

State Code National Code Title Hours Type
WC711 UEENEEK142A Apply environmentally and sustainable procedures in the energy sector 18 Unit of competency
WC632 UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices 18 Unit of competency
WC473 UEENEEG111A Carry out basic repairs to electrical components and equipment 36 Unit of competency
WC501 UEENEEG157A Conduct electrical tests on LV electrical machines 36 Unit of competency
WC503 UEENEEG159A Conduct mechanical tests on electrical machines and components 36 Unit of competency
OAH20 UEPOPS301 Conduct single energy source isolation procedures for permit to work 36 Unit of competency
WC666 UEENEEI150A Develop, enter and verify discrete control programs for programmable controllers 54 Unit of competency
WC475 UEENEEG116A Diagnose and rectify faults in traction lift systems 72 Unit of competency
WC472 UEENEEG110A Find and repair faults in LV d.c. electrical apparatus and circuits 54 Unit of competency
WC458 UEENEEF102A Install and maintain cabling for multiple access to telecommunication services 108 Unit of competency
WC460 UEENEEF104A Install and modify performance data communication copper cabling 36 Unit of competency
OAH94 UEPMNT370 Maintain and monitor wind farm civil assets 36 Unit of competency
WC508 UEENEEG165A Maintain and service traction lifts systems and equipment 36 Unit of competency
OAH93 UEPMNT369 Monitor climatic conditions for renewable electricity generation 36 Unit of competency
OAG81 UEPOPS349 Operate local H.V. switchgear 36 Unit of competency
WC487 UEENEEG129A Overhaul and repair major switchgear and controlgear 54 Unit of competency
WD670 UETTDRIS44A Perform HV field switching operation to a given schedule 45 Unit of competency
WC507 UEENEEG164A Repair and maintain mechanical components of electrical machines 36 Unit of competency
WC532 UEENEEH102A Repairs basic electronic apparatus faults by replacement of components 36 Unit of competency
WC464 UEENEEF108A Select and arrange equipment for wireless communication networks 36 Unit of competency
WC463 UEENEEF107A Set up and configure the wireless capabilities of communications and data storage devices 36 Unit of competency
WC467 UEENEEF111A Test, report and rectify faults in data and voice installations 36 Unit of competency
WC541 UEENEEH111A Troubleshoot single phase input d.c. power supplies 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
WC618 UEENEEI101A Use instrumentation drawings, specification, standards and equipment manuals 36 Unit of competency
WD654 UETTDREL16A Working safely near live electrical apparatus 18 Unit of competency
4. Group C Elective Units

A minimum of 260 to a maximum of 380 weighting points may be chosen from Group C.
Please refer to TGA for a full list of unit weighting points.

State Code National Code Title Hours Type
OAG63 UEPOPS402 Conduct multiple energy source isolation procedures for permit to work 36 Unit of competency
OAG44 UEPOPS424 Coordinate local H.V. networks 27 Unit of competency
OAH55 UEPMNT446 Coordinate maintenance on a wind farm 54 Unit of competency
OAG40 UEPOPS428 Develop H.V. switching programs 18 Unit of competency
OAH56 UEPMNT445 Diagnose and repair faults in large scale wind turbine generators 54 Unit of competency
OAH53 UEPMNT448 Diagnose and repair faults in wind turbine generator control systems 54 Unit of competency
OAH54 UEPMNT447 Diagnose and repair faults in wind turbine generator electrical systems 54 Unit of competency
OAH52 UEPMNT449 Diagnose and repair mechanical systems faults in wind turbine generators 54 Unit of competency
OAH58 UEPMNT443 Maintain wind turbine generator control systems 54 Unit of competency
OAH59 UEPMNT442 Maintain wind turbine generator electrical systems 54 Unit of competency
OAH57 UEPMNT444 Maintain wind turbine generator mechanical systems 54 Unit of competency
OAG19 UEPOPS456 Perform switching to a switching program 27 Unit of competency
OAH51 UEPMNT450 Test and commission wind turbine generators 54 Unit of competency
Replaces
State Code National Code Title Type
J529 UEP40612 Certificate IV in Large Scale Wind Generation - Electrical Qualification
Replaced By
State Code National Code Title Type
BHQ4 UEP40622 Certificate IV in Wind Power Generation Qualification
No information
Entry Requirements

There are no entry requirements for this qualification.

Traineeships and Apprenticeships
No information