Unit of competency Outline
Date retreived
22/07/2026 6:52 AM AWST
22/07/2026 6:52 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assemble, enter and verify operating instructions in microprocessor equipped devices
Assemble, enter and verify operating instructions in microprocessor equipped devices
Unit of competency
National Code
UEEIC0002
UEEIC0002
State Code
OBZ75
OBZ75
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031317 - Electronic Equipment Servicing
Original Release Date
12/07/2021
Nominal Hours
18
Description
This unit involves the skills and knowledge required to assemble, enter and verify operating instructions in microprocessor equipped device with simple inbuilt programming functions ensuring the device operates as intended.It includes working safely, checking device installation, following written and oral instructions and workplace procedures, and completing necessary documentation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to assemble and enter operating instructions
- 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
- 1.2 Hazards are identified, risks assessed and control measures implemented
- 1.3 Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures is sought from supervisor
- 1.4 Supervisor/customers are consulted to determine which functions of the device are used and the parameter of each
- 1.5 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures
- 1.6 Device installation is checked for compliance with job specification and regulations where required
2 Assemble and enter operating instructions
- 2.1 WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
- 2.2 Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- 2.3 Required status of each function of the device is entered and their parameters set in accordance with manufacturer programming instructions
- 2.4 Entered data is checked in accordance with specifications stated by work supervisor/customer
- 2.5 Unplanned situations are responded to in accordance with workplace procedures and approval of an authorised person/s
3 Test device operation and report
- 3.1 Device operation is tested in accordance with workplace procedures
- 3.2 Operating anomalies are identified and corrected in accordance with workplace procedures
- 3.3 WHS/OHS work completion risk control measures and workplace procedures are followed
- 3.4 Worksite is cleaned and made safe in accordance with workplace procedures
- 3.5 Work completion is documented and appropriate person/s notified in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC632 | UEENEEI116A | Assemble, enter and verify operating instructions in microprocessor equipped devices | Unit of competency |