Unit of competency Outline

Date retreived
22/07/2026 3:48 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and saw logs in multi-species operations

Select and saw logs in multi-species operations

Unit of competency
National Code
FWPSAW3250
State Code
OBM09
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
29/05/2020
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to select and saw (break down) logs from multiple timber species into flitches or cants, and maintain production flow while allowing for changes in species.The unit applies to individuals who select and saw logs from multiple species in a timber processing plant.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for sawing and select logs
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with selecting and sawing logs in multi-species operations
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Reject, segregate or dispose of defective logs according to workplace procedures and environmental protection practices
  • 1.6 Select tools and equipment for sorting and sawing operations, and check for serviceability
  • 1.7 Identify cutting patterns to achieve maximum output of flitches and cants from different species
  • 1.8 Plan flow of logs in and out of the sawing area to maximise production
2. Break down logs
  • 2.1 Complete pre-start-up equipment checks to ensure operational effectiveness
  • 2.2 Use dogs to secure and align logs to saw and minimise damage
  • 2.3 Clear logs of foreign matter and feed into saw at feed rate according to workplace safety procedures
  • 2.4 Plan, maintain and adjust sawing sequence to produce the required quantity of flitches or cants and maximise feed rate
  • 2.5 Check and adjust break down process regularly to maintain desired quality and output, allowing for defects and changes in species
  • 2.6 Direct flitches or cants to the designated area according to work order
  • 2.7 Identify routine processing problems, and resolve or report to appropriate personnel
3. Complete operator maintenance
  • 3.1 Lock out equipment according to workplace procedures
  • 3.2 Check saw blades for bluntness or damage
  • 3.3 Remove and replace saw blades according to manufacturer recommendations
  • 3.4 Dispose of used blades according to workplace procedures and environmental protection practices
  • 3.5 Complete basic non-specialist maintenance of equipment
  • 3.6 Keep machine clear of dust and debris according to safety procedures
  • 3.7 Record and report equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXJ81 FWPSAW3227 Select and saw logs in multi-species operations Unit of competency
Replaced By
State Code National Code Title Type
OFC85 FWPSAW3256 Select and saw logs in multi-species operations Unit of competency
State Code National Code Title Type
BAM5 FWP30316 Certificate III in Sawmilling and Processing Qualification