Unit of competency Outline

Date retreived
22/07/2026 1:51 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Select and saw logs in multi-species operations

Select and saw logs in multi-species operations

Unit of competency
National Code
FWPSAW3256
State Code
OFC85
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2023
View on TGA
State Implementation and Classification
Approved Date
19/05/2023
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
19/05/2023
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to segregate and saw logs into flitches or cants and maintain the production flow, allowing for changes in species. Work includes operator maintenance.The unit applies to individuals who select and saw logs in multi-species operations in a timber processing facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for sawing in multi-species operation
  • 1.1 Determine job requirements from work order or instructions and, where required, seek clarification from appropriate personnel
  • 1.2 Review workplace health and safety and environmental protection practices and/or procedures for work activity, including emergency procedures to be followed in the event of an emergency situation
  • 1.3 Identify and assess hazards and take actions to mitigate risks related to sawing logs
  • 1.4 Select tools and equipment for sorting and sawing operations, and check for serviceability
2. Segregate logs for sawing in multi-species operation
  • 2.1 Select appropriate logs according to species, size, grade and/or other characteristics to suit job requirements
  • 2.2 Reject and direct defective logs for reuse, recycling or disposal according to workplace procedures and environmental protection practices and/or procedures
  • 2.3 Identify sawing sequence and cutting patterns to achieve maximum output of flitches or cants from different species
  • 2.4 Plan flow of logs in and out of the sawing area to maximise production
3. Saw logs in multi-species operation
  • 3.1 Complete pre-start-up equipment checks to ensure operational effectiveness
  • 3.2 Use dogs to secure and align logs to saw and minimise damage
  • 3.3 Clear logs of foreign matter and feed into saw at feed rate according to workplace procedures
  • 3.4 Maximise feed rate and adjust sawing sequence or process regularly to achieve required production output and quality, considering log defects and changes in species
  • 3.5 Direct flitches or cants to designated area according to job requirements
  • 3.6 Identify routine processing problems and resolve or report to appropriate personnel
4. Complete operator maintenance
  • 4.1 Lock out equipment according to workplace procedures
  • 4.2 Check saw blades for bluntness or damage
  • 4.3 Remove and replace saw blades according to manufacturer recommendations
  • 4.4 Dispose of used blades according to workplace environmental protection practices and/or procedures
  • 4.5 Complete basic non-specialist maintenance of equipment
  • 4.6 Keep machine clear of dust and debris according to safety procedures
  • 4.7 Record and report equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
OBM09 FWPSAW3250 Select and saw logs in multi-species operations Unit of competency
State Code National Code Title Type
BJC1 FWP30322 Certificate III in Timber and Wood Products Operations Qualification