Unit of competency Outline

Date retreived
22/07/2026 10:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor a sugar mill powerhouse

Monitor a sugar mill powerhouse

Unit of competency
National Code
FBPSUG3006
State Code
OAO19
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
18/12/2018
View on TGA
State Implementation and Classification
Approved Date
18/04/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
18/04/2019
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to operate and monitor one or more turbines with attached alternators supplying factory power. It applies to both continuous and short-term powerhouse operation, including start-up and shutdown after a prolonged break.The unit applies to individuals working in the sugar milling industry. The work is typically carried out in liaison with an electrician.All work must be carried out to comply with workplace procedures according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to operate the powerhouse
  • 1.1 Select, fit and use personal protective equipment according to workplace safety procedures
  • 1.2 Run warm-up sequence of turbines and alternators in preparation for handover from local powerhouse to powerhouse consul
2. Monitor powerhouse operation
  • 2.1 Monitor powerhouse output against site requirements
  • 2.2 Monitor equipment to confirm operating condition according to workplace requirements
  • 2.3 Ensure the workplace meets cleaning standards
3. Analyse and respond to abnormal performance
  • 3.1 Analyse plant operating data and conditions to identify causes of abnormal performance
  • 3.2 Take corrective action in response to workplace hazards and abnormal plant performance
  • 3.3 Implement emergency procedures according to health and safety procedures
4. Hand over powerhouse operation
  • 4.1 Maintain workplace records according to workplace procedures
  • 4.2 Carry out handover according to workplace procedures
  • 4.3 Notify powerhouse operators of powerhouse and related equipment status
5. Shut down the powerhouse
  • 5.1 Identify the powerhouse shut down procedure and implement
  • 5.2 Prepare the powerhouse for storage in shutdown mode
  • 5.3 Identify and report operational maintenance requirements according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WD867 FDFSUG306A Monitor a sugar mill powerhouse Unit of competency