Unit of competency Outline

Date retreived
22/07/2026 11:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set and edit computer controlled thermal cutting machines

Set and edit computer controlled thermal cutting machines

Unit of competency
National Code
MEM05086
State Code
OEU04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/04/2023
Nominal Hours
36
Description
This unit of competency has been developed for post trade engineering fabrication training and the recognition of post trade skills in setting and editing computer controlled thermal cutting machines.It defines the skills and knowledge required to select and set appropriate work holding fixtures, determine and set thermal cutting nozzle controls, and to trial and complete the setting of the machine as defined by the unit in conjunction with its prerequisites.Where advanced manual thermal cutting, gouging and shaping is required, the unit MEM05071 Perform advanced manual thermal cutting, gouging and shaping should also be selected.Where setting and editing other computer controlled machines is required, the unit MEM07016 Set and edit computer controlled machines and processes should also be selected.Where the selection and use of power tools/handheld operations is required, the unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: This unit has dual status and is to be regarded as both a specialisation Band A unit and Specialisation Band B unit for progression to C7.Unit Weight: 4
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2. Set work holding fixtures, devices, tools and gas and nozzle controls
  • 2.1 Set up machine according to SOPs
  • 2.2 Prepare machine to accept work holding devices
  • 2.3 Replace worn or damaged nozzles, regulators and work holding devices/tools or take other corrective action in accordance with SOPs
  • 2.4 Set work holding fixtures, devices or tools to zero or a datum using appropriate setting devices
  • 2.5 Set gas and nozzle controls according to type and thickness of material to be cut and to minimise distortion
3. Trial and complete program
  • 3.1 Trial program observing all safety procedures
  • 3.2 Check sample cut for compliance with specifications
  • 3.3 Edit program and complete setting process to ensure job conforms to specification
  • 3.4 Save edited program and complete any required records in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
OAW68 MEM05053 Set and edit computer controlled thermal cutting machines Unit of competency