Unit of competency Outline

Date retreived
22/07/2026 3:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply predator trapping techniques

Apply predator trapping techniques

Unit of competency
National Code
AHCPMG403
State Code
OCT39
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/12/2020
State Implementation and Classification
Approved Date
21/05/2021
Field of Education
059901 - Pest And Weed Control
Original Release Date
21/05/2021
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge required to effectively use leg hold traps to capture predator species, to release the animal unharmed as part of research programs or to humanely euthanise in accordance with pest management programs. It primarily deals with the use of leg hold or foothold traps to capture predator pest species, including dogs, foxes and cats. Animals may be native animals, domestic animals, animals determined to be pests or feral animals. Trapping techniques call for the use of a variety of equipment and may include the use of lures or attractants baits.Trapping must be carried out in accordance with an approved pest management plan or research project plan.The unit applies to individuals who work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.Some forms of traps are strictly regulated in some states and territories in Australia. Specific determination should be sought through the relevant state or territory authority.Where feral animals are trapped, they may need to be euthanised with a firearm. Firearms licensing conditions apply to this unit, in particular the use of Cat A, B or C firearms. Specific approval should be sought through the relevant state or territory firearms licensing agency.Appropriate firearms licences and training are also required for those involved in training and assessment of this unit.
Notes
Elements and Performance Criteria
1. Assess site and predator trapping requirements
  • 1.1 Identify purpose of animal capture and set objectives
  • 1.2 Confirm the location and extent of the pest problem
  • 1.3 Confirm target animal movement patterns and behaviour to determine trapping location and placement of equipment
  • 1.4 Identify non-target animals present in the area
  • 1.5 Estimate time required to complete trapping
2. Prepare equipment required for trapping
  • 2.1 Identify and check vehicles, materials and equipment required for trapping
  • 2.2 Clean and maintain trapping equipment and prepare traps for trapping
  • 2.3 Identify hazards, assess risks and implement controls according to workplace health and safety and environmental procedures
  • 2.4 Assess site access requirements and obtain authority and permits to enter property
  • 2.5 Identify potential hazards to non-target animals from trapping, and implement control strategies to mitigate risk
  • 2.6 Tune, modify and prepare traps to minimise non-target capture
3. Place and set traps
  • 3.1 Undertake site surveillance to identify target and non-target animals
  • 3.2 Identify and interpret signs of target animal
  • 3.3 Select, check and use personal protective equipment
  • 3.4 Select and prepare trap site to maximise opportunity of trapping target animals
  • 3.5 Position, set, calibrate and check trapping equipment
  • 3.6 Apply lures, decoys or baits and toxins according to trapping objectives
  • 3.7 Camouflage traps according to trap design
4. Check and remove traps
  • 4.1 Inspect traps according to frequency specified in trapping objectives and legislative requirements
  • 4.2 Identify trapped animals, then release, destroy or prepare for transport according to trapping objective
  • 4.3 Handle and transport captured animals humanely according to animal welfare codes of practice
  • 4.4 Observe workplace health and safety procedures and public safety requirements during trapping activities
  • 4.5 Render traps safe and remove trap according to manufacturer specifications
  • 4.6 Restore trap site to its prior condition
5. Maintain accurate records
  • 5.1 Record details of trapping activities according to workplace procedures
  • 5.2 Report results of trapping activities and incidents according to workplace procedures
  • 5.3 Report trapping results and outcomes according to approved management plan
  • 5.4 Record trap locations and captures according to workplace record-keeping procedures
6. Clean and store equipment and material
  • 6.1 Remove, retain or dispose of carcases according to workplace health and safety and biosecurity procedures
  • 6.2 Clean, maintain and store equipment and unused materials
No information
No information
Replaces
State Code National Code Title Type
BAL84 AHCPMG414 Apply predator trapping techniques Unit of competency