Unit of competency Outline

Date retreived
24/07/2026 3:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Predict polymer properties and characteristics

Predict polymer properties and characteristics

Unit of competency
National Code
PMBTECH401E
State Code
ODA72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
60
Description
This unit describes the skills and knowledge required to apply thermoplastic polymer properties and characteristics to product and process improvement.This unit applies to an experienced technician working alone or as part of a team.The unit principally refers to the connection between the behaviour in processing polymers and in product performance, and the physical and chemical make-up of the polymers.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Predict impact of processing conditions on polymer properties
  • 1.1 Predict property changes caused by molecular weight and temperature to inform process specifications
  • 1.2 Identify glass transition temperature and melting point relative to ambient temperature to inform process specifications
  • 1.3 Use knowledge of morphological changes that occur to polymers as temperature is raised to typical moulding conditions to inform process specifications
  • 1.4 Use knowledge of effect of cooling rate on polymer morphology to inform process specifications
  • 1.5 Predict potential product dimension or shape changes caused by internal stresses resulting from molecular orientation to inform process specifications
  • 1.6 Determine effect of post-mould annealing on degree of crystallisation and crystal size to inform process specifications
2. Predict physical properties of polymers from their morphology
  • 2.1 Predict effects that temperature, crystal size, degree of crystallisation and molecular orientation have on physical properties using resources including phase diagrams
  • 2.2 Predict shrinkage from morphology to inform process specifications
3. Assess likely physical failures of polymers
  • 3.1 Assess impact physical usage conditions have on physical failures
  • 3.2 Assess impact various polymer characteristics have on physical failures
4. Plan for and interpret polymer tests
  • 4.1 Infer melt flow properties from flow data to inform process specifications
  • 4.2 Select test type and method that will validly measure results against desired criteria
  • 4.3 Interpret test results, taking account of variables and impact of variances
No information
No information
Replaces
State Code National Code Title Type
BAI05 PMBTECH401 Predict polymer properties and characteristics Unit of competency