Unit of competency Outline

Date retreived
23/07/2026 5:03 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, service and repair electronic management, monitoring and tracking systems

Inspect, service and repair electronic management, monitoring and tracking systems

Unit of competency
National Code
AURETR021
State Code
AXD86
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
13/07/2016
Nominal Hours
30
Description
This unit describes the performance outcomes required to inspect, service and repair electronic monitoring, management and tracking systems fitted to heavy vehicles or machinery. It involves preparing for the task, inspecting the systems, repairing the systems, and completing workplace processes and documentation, including any associated recommendations for further action.It applies to those working in the automotive service and repair industry. The electronic management, monitoring and tracking systems include those in heavy vehicles, agricultural machinery or mobile plant machinery.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect, service and repair electronic management, monitoring and tracking system
  • 1.1 Job requirements are determined according to workplace instructions
  • 1.2 Inspection, servicing and repair procedures are accessed and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and electrical test equipment are selected and checked for serviceability
2. Inspect and test system
  • 2.1 System is inspected and tested according to workplace procedures and safety requirements
  • 2.2 Circuits are tested according to workplace procedures and without causing damage to components or systems
  • 2.3 Inspection results are compared with manufacturer specifications
  • 2.4 Inspection findings are reported according to workplace procedures, including recommendations for required repairs or adjustments
3. Service and repair system
  • 3.1 System is serviced and repaired according to manufacturer and component specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.2 System is performance tested and final adjustments are made
  • 3.3 Post-repair testing is carried out to confirm system is operating to manufacturer specifications, any reported problems are resolved, and no other problems are present
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or machinery is presented ready for use with protective guards, safety features and cowlings in place
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information