Unit of competency Outline

Date retreived
22/07/2026 10:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Test the integrity of water-based fire protection systems using pressure

Test the integrity of water-based fire protection systems using pressure

Unit of competency
National Code
CPCPFS3046
State Code
OCO20
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
23/12/2020
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040327 - Plumbing
Original Release Date
01/06/2021
Nominal Hours
8
Description
This unit of competency specifies the skills and knowledge required to test the integrity of water-based fire protection systems using pressure.It includes performing water pressure testing on fire safety sprinkler and hydrant systems to establish the integrity of the water-based system or to identify and rectify leaks.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
Notes
Elements and Performance Criteria
1 Plan the work.
  • 1.1 Obtain, read and apply water-based fire protection systems requirements from relevant job plans and specifications, codes, Australian Standards, manufacturer’s specifications and jurisdictional requirements.
  • 1.2 Identify and apply workplace policies and procedures, work health and safety (WHS) and environmental requirements.
  • 1.3 Identify materials and components and calculate quantities.
2 Prepare for work.
  • 2.1 Check material and components for conformity and action any discrepancies.
  • 2.2 Select and check serviceability of tools, equipment and personal protective equipment (PPE) and rectify or report any faults.
  • 2.3 Prepare work area to efficiently test fire protection system.
  • 2.4 Determine the type of test to be performed and prepare appropriate testing equipment.
3 Test fire protection systems.
  • 3.1 Connect air test equipment to system using pressure test not exceeding 50KPa.
  • 3.2 Connect water test equipment and conduct hydrostatic test according to relevant codes and Australian Standard.
  • 3.3 Record readings from each pressure gauge in format determined by job specifications and quality assurance requirements.
  • 3.4 Isolate water supply and open all water outlets to drain down system.
  • 3.5 Recharge and restore system to operational condition.
  • 3.6 Complete documentation and submit within required timeframe.
4 Clean up.
  • 4.1 Clear the work area, and dispose of, reuse or recycle materials in accordance with state and territory legislation and workplace policies and procedures.
  • 4.2 Clean tools and equipment, check for serviceability and report any damage, and store and secure.
No information
No information
Replaces
State Code National Code Title Type
WI769 CPCPFS3046A Test the integrity of water-based fire protection systems using pressure Unit of competency
State Code National Code Title Type
BGC1 CPC32820 Certificate III in Fire Protection Qualification