Unit of competency Outline

Date retreived
23/07/2026 4:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Obtain representative samples in accordance with sampling plan

Obtain representative samples in accordance with sampling plan

Unit of competency
National Code
MSL954001
State Code
AWO32
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
019909 - Laboratory Technology
Original Release Date
16/08/2016
Nominal Hours
40
Description
This unit of competency covers the ability to obtain a range of samples that are representative of the source material (e.g. raw ingredients, product in process and final product) and to prepare the samples for testing. All sampling activities are conducted in accordance with a defined sampling plan. This unit does not cover the subsequent testing of the samples.This unit of competency is applicable to laboratory technicians in all industry sectors. While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Prepare for sampling
  • 1.1 Confirm the sampling location, number and type of samples, and timing and frequency of sampling from workplace or client's sampling plan
  • 1.2 Liaise with relevant personnel to arrange site access and all necessary clearances and/or permits as required
  • 1.3 Select sampling equipment and conditions to achieve representative samples and preserve sample integrity during collection, storage and transit
  • 1.4 Check that all procedures are in accordance with client or workplace requirements, relevant standards and codes
  • 1.5 Identify site and sampling hazards and review workplace safety procedures
  • 1.6 Assemble and check all sampling equipment, materials, containers and safety equipment
  • 1.7 Arrange suitable transport to, from and around site as required
2 Conduct sampling and log samples
  • 2.1 Locate sampling sites and, if required, services at the site
  • 2.2 Conduct representative sampling in accordance with sampling plan and defined procedures
  • 2.3 Record all information and label samples in accordance with traceability requirements
  • 2.4 Record environment or production conditions and any atypical observations made during sampling that may impact on sample representativeness or integrity
  • 2.5 Transport all samples back to base according to standard operating procedures (SOPs) and relevant codes
3 Prepare samples for testing
  • 3.1 Prepare sub-samples and back-up sub-samples that are representative of the source
  • 3.2 Label all sub-samples to ensure traceability and store in accordance with SOPs
  • 3.3 Follow defined preparation and safety procedures to limit hazard or contamination to samples, self, work area and environment
  • 3.4 Distribute sub-samples to defined workstations maintaining sample integrity and traceability requirements
4 Address client issues
  • 4.1 Enter approved information into laboratory information management system (LIMS)
  • 4.2 Report all relevant aspects of the sampling and preparation phases in accordance with workplace procedures
  • 4.3 Ensure that information provided to client is accurate, relevant and authorised for release
  • 4.4 Maintain security and confidentiality of all client/workplace data and information
5 Maintain a safe work environment
  • 5.1 Clean all equipment, containers, work area and vehicles according to workplace procedures
  • 5.2 Check serviceability of all equipment before storage
  • 5.3 Use defined safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other personnel
  • 5.4 Minimise the generation of wastes and environment impacts
  • 5.5 Ensure the safe collection of all hazardous wastes for appropriate disposal
No information
No information
Replaces
State Code National Code Title Type
WA696 MSL954001A Obtain representative samples in accordance with sampling plan Unit of competency
Replaced By
State Code National Code Title Type
OAC47 MSL954004 Obtain representative samples in accordance with sampling plan Unit of competency