Unit of competency Outline
Date retreived
22/07/2026 8:12 AM AWST
22/07/2026 8:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Obtain representative samples in accordance with sampling plan
Obtain representative samples in accordance with sampling plan
Unit of competency
National Code
MSL954004
MSL954004
State Code
OAC47
OAC47
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/11/2018
Field of Education
019909 - Laboratory Technology
Original Release Date
29/11/2018
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge to obtain a range of samples that are representative of the source material and to prepare the samples for testing. All sampling activities are conducted in accordance with a defined sampling plan. This unit does not cover the subsequent testing of the samples.This unit of competency applies to laboratory technicians in all industry sectors. No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1 Prepare for sampling
- 1.1 Confirm the sampling location, number and type of samples, and timing and frequency of sampling from workplace or client's sampling plan
- 1.2 Liaise with relevant personnel to arrange site access and all necessary clearances and/or permits as required
- 1.3 Select sampling equipment and conditions to achieve representative samples and preserve sample integrity during collection, storage and transit
- 1.4 Check that all procedures are in accordance with client or workplace requirements, relevant standards and codes
- 1.5 Identify site and sampling hazards and review workplace safety procedures
- 1.6 Assemble and check all sampling equipment, materials, containers and safety equipment
- 1.7 Arrange suitable transport to, from and around site as required
2 Conduct sampling and log samples
- 2.1 Locate sampling sites
- 2.2 Conduct representative sampling in accordance with sampling plan and defined procedures
- 2.3 Record all information and label samples in accordance with traceability requirements
- 2.4 Record environment or production conditions and any atypical observations made during sampling that may impact on sample representativeness or integrity
- 2.5 Transport all samples back to base according to standard operating procedures (SOPs) and relevant codes
3 Prepare samples for testing
- 3.1 Prepare sub-samples and back-up sub-samples that are representative of the source
- 3.2 Label all sub-samples to ensure traceability and store in accordance with SOPs
- 3.3 Follow defined preparation and safety procedures to limit hazard or contamination to samples, self, work area and environment
- 3.4 Distribute sub-samples to defined workstations maintaining sample integrity and traceability requirements
4 Address client issues
- 4.1 Enter approved information into laboratory information management system (LIMS), as required
- 4.2 Report all relevant aspects of the sampling and preparation phases in accordance with workplace procedures
- 4.3 Ensure that information provided to client is accurate, relevant and authorised for release
- 4.4 Maintain security and confidentiality of all client/workplace data and information
5 Maintain a safe work environment
- 5.1 Clean all equipment, containers, work area and vehicles according to workplace procedures
- 5.2 Check serviceability of all equipment before storage
- 5.3 Use defined safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other personnel
- 5.4 Minimise the generation of wastes and environment impacts
- 5.5 Ensure the safe collection of all hazardous wastes for appropriate disposal
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWO32 | MSL954001 | Obtain representative samples in accordance with sampling plan | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEY14 | MSL954007 | Obtain representative samples in accordance with sampling plan | Unit of competency |