Qualification Outline
22/07/2026 4:44 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Diploma of Civil Construction Design
Diploma of Civil Construction Design
RII50520
BGK7
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 12/03/2021 | Current | Approved |
| 1.00 | 25/01/2021 | Replaced | Approved |
Description
This qualification reflects the role of individuals working as designers or design paraprofessionals who support professional engineers. They perform tasks involving a high level of autonomy and requiring the application of significant judgement in planning and determining the selection of equipment/roles/techniques for themselves and others. They are required to develop site specific work designs to ensure the implementation of the client’s site requirements. They demonstrate the application of a broad range of technical, managerial, coordination and planning skills.
Licensing, legislative, regulatory or certification considerations
Licensing, legislative and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the qualification.
Schedule
Packaging Rules
The following table provides the packaging rules for this qualification, followed by the list of relevant units of competency.Total number of units = twenty (20)
- twenty (20) elective units, of which:
- at least two (2) must be chosen from Group A
- at least two (2) must be chosen from Group B
- at least four (4) must be chosen from Group C
- at least four (4) must be chosen from Group D
- no more than three (3) units may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are prerequisites to imported units listed in this qualification with guidelines for unit selection of prerequisites outlined at the end of this section. Where a unit is imported all prerequisites specified must be complied with and the combined choice of imported elective units and/or their prerequisites must not compromise the AQF alignment of this qualification. Refer to RII Companion Volume Implementation Guide Pathways Section for further guidance.
1. Group A Elective Units
At least two (2) units must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OCG10 | BSBINS501 | Implement information and knowledge management systems | 40 | Unit of competency |
| OCE21 | BSBSTR601 | Manage innovation and continuous improvement | 65 | Unit of competency |
| OCE37 | BSBOPS505 | Manage organisational customer service | 35 | Unit of competency |
| OCD50 | BSBPEF501 | Manage personal and professional development | 55 | Unit of competency |
| OCE75 | BSBPMG537 | Manage project procurement | 35 | Unit of competency |
| OCD51 | BSBPMG532 | Manage project quality | 35 | Unit of competency |
| OCE50 | BSBPMG536 | Manage project risk | 40 | Unit of competency |
| OCD39 | BSBPMG531 | Manage project time | 35 | Unit of competency |
| OCD89 | BSBTWK502 | Manage team effectiveness | 55 | Unit of competency |
2. Group B Elective Untis
At least two (2) units must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WE078 | MEM30031A | Operate computer-aided design (CAD) system to produce basic drawing elements | 40 | Unit of competency |
| WE079 | MEM30032A | Produce basic engineering drawings | 80 | Unit of competency |
| WE080 | MEM30033A | Use computer-aided design (CAD) to create and display 3-D models | 40 | Unit of competency |
3. Group C Elective Units
At least four (4) units must be completed.
Please refer to the packaging rules for the full details of available options.
4. Group D Elective Units
At least four (4) units must be completed.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZE3 | RII50515 | Diploma of Civil Construction Design | Qualification |
No information
Entry Requirements
Nil
Traineeships and Apprenticeships