Unit of competency Outline

Date retreived
22/07/2026 8:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Obtain representative samples in accordance with sampling plan

Obtain representative samples in accordance with sampling plan

Unit of competency
National Code
MSL954007
State Code
OEY14
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/12/2022
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
019909 - Laboratory Technology
Original Release Date
24/05/2023
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge to obtain a range of samples that are representative of the source material and to prepare the samples for testing. All sampling activities are conducted in accordance with a defined sampling plan. This unit does not cover the subsequent testing of the samples.This unit of competency applies to laboratory technicians in all industry sectors. No licensing or certification requirements exist at the time of publication. However, regulations and/or external accreditation requirements for laboratory operations exist, so local requirements should be checked. Relevant legislation, industry standards and codes of practice within Australia must also be applied.
Notes
Elements and Performance Criteria
1. Prepare for sampling
  • 1.1 Confirm the sampling location, number and type of samples, and timing and frequency of sampling from workplace or client’s sampling plan
  • 1.2 Liaise with relevant personnel to arrange site access and all necessary clearances and/or permits
  • 1.3 Select sampling equipment and conditions to achieve representative samples and preserve sample integrity during collection, storage and transit
  • 1.4 Check that all procedures are in accordance with client or workplace requirements, relevant standards and codes
  • 1.5 Identify site and sampling hazards and review workplace safety procedures
  • 1.6 Assemble and check all sampling equipment, materials, containers and safety equipment
  • 1.7 Arrange suitable transport to, from and around site as required
2. Conduct sampling and log samples
  • 2.1 Locate sampling sites
  • 2.2 Conduct representative sampling in accordance with sampling plan and workplace procedures, limiting hazard or contamination to samples, self, work area and environment
  • 2.3 Record all information and label samples in accordance with traceability and chain of custody requirements
  • 2.4 Record environment or production conditions and any atypical observations made during sampling that may impact on sample representativeness or integrity
  • 2.5 Transport all samples back to base in accordance with procedures and relevant codes
3. Address client issues
  • 3.1 Ensure that information provided to client is accurate, relevant and authorised for release
  • 3.2 Maintain security and confidentiality of all client and workplace data and information
4. Maintain a safe work environment
  • 4.1 Clean all equipment, containers, work area and vehicles in accordance with workplace procedures
  • 4.2 Check serviceability of all equipment before storage
  • 4.3 Use defined safe work practices and personal protective equipment (PPE) to ensure personal safety and that of other personnel
  • 4.4 Minimise the generation of wastes and environmental impacts
  • 4.5 Ensure the safe collection of all hazardous wastes for appropriate disposal
No information
No information
Replaces
State Code National Code Title Type
OAC47 MSL954004 Obtain representative samples in accordance with sampling plan Unit of competency