Unit of competency Outline

Date retreived
22/07/2026 1:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fabricate parts for vehicle sub-assemblies

Fabricate parts for vehicle sub-assemblies

Unit of competency
National Code
AUMGTS004
State Code
WH973
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030101 - Manufacturing Engineering
Original Release Date
11/03/2014
Nominal Hours
36
Description
This unit describes the performance outcomes required to produce, finish and test parts and components for vehicle sub-assemblies.It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a production worker level.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Work orders, job specifications and drawings are identified and confirmed
  • 1.2 Tools, equipment and materials are identified, selected and prepared according to work order and job specification
  • 1.3 Materials are inspected for quality, and defects identified and reported
  • 1.4 Welding equipment is selected, inspected, tested and adjusted according to job requirements
2. Weld components
  • 2.1 Components are welded as identified in working drawings according to workplace procedures
  • 2.2 Welds are completed to workplace quality standards and weld specifications
  • 2.3 Welded parts are checked against job specifications
  • 2.4 Weld faults are identified and rectified according to workplace procedures
3. Assemble and finish sub-assemblies
  • 3.1 Sub-assemblies are completed and checked against job specification
  • 3.2 Sub-assembly fasteners are tensioned to specifications
  • 3.3 Seals, adhesives and sealants are applied to ensure joints are leak free
4. Complete work processes
  • 4.1 Final inspections are made and faulty sub-assemblies are reworked in line with workplace procedures
  • 4.2 Tools, equipment and work areas are cleaned, maintained, and inspected according to workplace procedures
  • 4.3 Waste material is collected and recycled or disposed of according to workplace procedures
  • 4.4 Faulty equipment is identified, tagged and reported according to workplace procedures
  • 4.5 Work job sheets are completed and reported to supervisor
No information
No information
Replaces
State Code National Code Title Type
WE173 AUMGTS3004 Fabricate parts for sub-assemblies Unit of competency