Unit of competency Outline

Date retreived
22/07/2026 3:41 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and overhaul bicycle wheels and hubs

Repair and overhaul bicycle wheels and hubs

Unit of competency
National Code
AURBTJ104
State Code
OCK37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to repair and overhaul bicycle wheels with different hub, spoke and rim configurations. The unit involves preparing for the work, selecting and using specialist tools and equipment, repairing and testing the bicycle wheels and hubs to manufacturer specifications, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair and overhaul bicycle wheels and hubs
  • 1.1 Determine job requirements from workplace instructions, including wheel and hub repair methods and materials
  • 1.2 Access and interpret manufacturer specifications, workplace procedures and other required technical information
  • 1.3 Inspect bicycle wheels and hubs for worn or damaged components
  • 1.4 Identify and confirm repair options and techniques, and identify hazards associated with the work
  • 1.5 Source replacement wheel and hub parts and components
  • 1.6 Select and check tools and equipment for serviceability
  • 1.7 Plan work avoid damage to bicycle, minimise waste and use time efficiently
  • 1.8 Prepare work area and wheel and hub for repair or overhaul
2. Carry out repair and overhaul of bicycle wheels and hubs
  • 2.1 Remove bicycle wheels according to manufacturer specifications and safety and environmental requirements
  • 2.2 Check rims and adjust as required
  • 2.3 Check spokes and replace any broken
  • 2.4 Adjust and tension spokes
  • 2.5 Use wheel truing equipment and techniques to check for required operation according to manufacturer specifications and adjust as required, prior to refitting wheel
  • 2.6 Refit wheels and regrease wheel hubs according to workplace procedures
  • 2.7 Report results and quality issues to authorised personnel as required
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXE39 AURBTJ004 Repair and overhaul bicycle wheels and hubs Unit of competency
State Code National Code Title Type
BFY4 AUR30220 Certificate III in Bicycle Workshop Operations Qualification