Unit of competency Outline

Date retreived
22/07/2026 6:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and overhaul bicycle wheels and hubs

Repair and overhaul bicycle wheels and hubs

Unit of competency
National Code
AURBTJ004
State Code
AXE39
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to repair and overhaul bicycle wheels with different hub, spoke and rim configurations. It involves preparing for the work, selecting and using specialist tools and equipment, repairing and testing the bicycle wheels and hubs to manufacturer specifications, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair and overhaul bicycle wheels and hubs
  • 1.1 Job requirements are determined from workplace instructions, including wheel and hub repair methods and materials
  • 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted
  • 1.3 Bicycle wheels and hubs are inspected for worn or damaged components
  • 1.4 Repair options and techniques are identified and confirmed, and hazards associated with the work are identified
  • 1.5 Replacement wheel and hub parts and components are sourced
  • 1.6 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.7 Work is planned to avoid damage to bicycle, minimise waste and use time efficiently
  • 1.8 Work area and wheel and hub are prepared for repair or overhaul
2. Carry out repair and overhaul of bicycle wheels and hubs
  • 2.1 Bicycle wheels are removed according to manufacturer specifications and safety and environmental requirements
  • 2.2 Rims are checked and adjusted as required
  • 2.3 Spokes are checked, replaced if broken, adjusted and tensioned
  • 2.4 Wheel truing equipment and techniques are used to check for correct operation according to manufacturer specifications and adjusted, as required, prior to refitting wheel
  • 2.5 Wheels are refitted and wheel hubs are regreased according to workplace procedures
  • 2.6 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF058 AURBTJ3004 Repair and overhaul bicycle wheels and hubs Unit of competency
Replaced By
State Code National Code Title Type
OCK37 AURBTJ104 Repair and overhaul bicycle wheels and hubs Unit of competency
State Code National Code Title Type
BAE5 AUR30216 Certificate III in Bicycle Workshop Operations Qualification