Unit of competency Outline

Date retreived
22/07/2026 9:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use electric welding machines

Use electric welding machines

Unit of competency
National Code
MEMPE002
State Code
OEU67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030711 - Boilermaking And Welding
Original Release Date
19/04/2023
Nominal Hours
35
Description
This unit of competency defines the skills and knowledge required to use manual metal arc, gas metal arc or gas tungsten arc welding machines. The welding is not required to meet any Australian Standard. Fillet and butt welds would typically be performed on low carbon or mild steels and aluminium if required. The basic settings for the welding machine and welding materials are supplied to the individual.This unit describes entry-level skills and knowledge in preparation for employment within the metal, engineering, manufacturing and associated industries and is suitable for use in institutional-based vocational programs. Skills development take places under direct supervision.It is not to be used in a traineeship or apprenticeship training program or associated qualifications. It is only to be used in pre-employment programs and carries no credit towards apprenticeship/trade and other qualification types in manufacturing and engineering.This skills in this unit are intended to be developed in combination with the project unit, MEMPE006 Undertake a basic engineering project.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify weld requirements
  • 1.1 Comply with work health and safety (WHS) requirements at all times
  • 1.2 Identify weld requirements from work information in consultation with a supervisor
  • 1.3 Identify which type of welding is suitable for the job
  • 1.4 Identify location of welds in accordance with job requirements
  • 1.5 Confirm weld locations with supervisor
2. Prepare for welding
  • 2.1 Clean and prepare low carbon or mild steel or similar ready for welding
  • 2.2 Set up welding equipment according to given instructions
3. Preform welding
  • 3.1 Use and wear appropriate personal protective equipment (PPE) in accordance with procedures
  • 3.2 Follow safe welding practices
  • 3.3 Weld materials to job requirements
  • 3.4 Clean welds safely
  • 3.5 Store completed work as instructed
4. Complete work requirements
  • 4.1 Clear work area of waste and clean according to requirements
  • 4.2 Maintain and/or store machines, tools and equipment according to instructions
No information
No information
Replaces
State Code National Code Title Type
WI699 MEMPE002A Use electric welding machines Unit of competency
State Code National Code Title Type
BIV9 MEM20422 Certificate II in Engineering Pathways Qualification