Unit of competency Outline
Date retreived
23/07/2026 12:01 PM AWST
23/07/2026 12:01 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use electric welding machines
Use electric welding machines
Unit of competency
National Code
MEMPE002A
MEMPE002A
State Code
WI699
WI699
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
05/03/2014
Field of Education
030711 - Boilermaking And Welding
Original Release Date
05/03/2014
Nominal Hours
35
Description
The unit of competency covers the use of manual metal arc, gas metal arc and gas tungsten arc welding machines depending on their availability in the learning institution.The welding is not required to meet any Australian Standard. Fillet and butt welds would typically be performed on low carbon/mild steels and aluminium if required. The basic settings for the welding machine and the welding materials will be supplied to the learner.
Notes
Elements and Performance Criteria
1 Identify weld requirements
- 1.1 Identify weld requirements in consultation with an instructor/teacher/trainer
- 1.2 Identify which type of welding is suitable for the job
- 1.3 Identify location of welds in accordance with job requirements
- 1.4 Confirm weld locations with instructor
2 Prepare for welding
- 2.1 Clean and prepare low and mild carbon steel or similar ready for welding
- 2.2 Set up welding equipment according to given instructions
3 Perform welding
- 3.1 Use and wear appropriate personal protective equipment
- 3.2 Follow safe welding practices
- 3.3 Weld materials to job requirements
- 3.4 Clean welds safely
- 3.5 Store completed work as instructed
4 Complete work requirements
- 4.1 Clear work area of waste and clean according to requirements
- 4.2 Maintain and/or store machines, tools and equipment according to instructions
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Weld requirements
Weld requirements may be identified from, but are not limited to:
drawings
sketches
job instructions
schematics
diagrams
technical manuals
Type of welding
Welding involves the use of electric welding machines and may include any or all of the following welding processes:
manual metal arc welding
gas metal arc welding
tungsten metal arc welding
Weld requirements
Weld requirements may be identified from, but are not limited to:
drawings
sketches
job instructions
schematics
diagrams
technical manuals
Type of welding
Welding involves the use of electric welding machines and may include any or all of the following welding processes:
manual metal arc welding
gas metal arc welding
tungsten metal arc welding
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to prepare welding materials and equipment and weld metal materials.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can:
work safely
prepare materials
set welding equipment according to given instructions
use electric welding machines to weld metal pieces together
read and interpret routine information on written job instructions
use measuring equipment as required
clean and store equipment as instructed.
Context of and specific resources for assessment
This unit must be assessed in a learning institution.
Assessment must cover the successful use of one or more electric welding machines.
The skills covered by this unit would be demonstrated by an individual working alone under direct supervision.
The assessment environment should not disadvantage the candidate.
This unit may be assessed in conjunction with any other units addressing the safety, quality, communication, hand tools, machine operation, recording and reporting associated with using electric welding machines.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the MEM05 Metal and Engineering Training Package.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment must confirm a reasonable inference that competency is not only able to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment should be in conjunction with assessment of the project unit and other units integrated into the project.
Guidance information for assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.
Overview of assessment
A person who demonstrates competency in this unit must be able to prepare welding materials and equipment and weld metal materials.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can:
work safely
prepare materials
set welding equipment according to given instructions
use electric welding machines to weld metal pieces together
read and interpret routine information on written job instructions
use measuring equipment as required
clean and store equipment as instructed.
Context of and specific resources for assessment
This unit must be assessed in a learning institution.
Assessment must cover the successful use of one or more electric welding machines.
The skills covered by this unit would be demonstrated by an individual working alone under direct supervision.
The assessment environment should not disadvantage the candidate.
This unit may be assessed in conjunction with any other units addressing the safety, quality, communication, hand tools, machine operation, recording and reporting associated with using electric welding machines.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the MEM05 Metal and Engineering Training Package.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment must confirm a reasonable inference that competency is not only able to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment should be in conjunction with assessment of the project unit and other units integrated into the project.
Guidance information for assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OEU67 | MEMPE002 | Use electric welding machines | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J780 | MEM20413 | Certificate II in Engineering Pathways | Qualification |
| BGQ28 | 52860WA | Certificate I in Industrial Skills (Entry Level Training) | Accredited course |
| BCX38 | 52807WA | Certificate I in Industrial Skills (Entry Level Training) | Accredited course |