Unit of competency Outline

Date retreived
23/07/2026 6:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair fire and security containers

Service and repair fire and security containers

Unit of competency
National Code
MEM20032
State Code
OEV33
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030715 - Precision Metalworking
Original Release Date
19/04/2023
Nominal Hours
54
Description
This unit of competency defines the skills and knowledge required to dismantle, inspect, repair, replace, service and assemble fire and security safes or containers and their components. It applies to service and repair work on commercial and domestic fire and security containers and can apply to regular servicing or call-out work and also be required after entry has been gained.Where interpretation of detailed, complex manufacturer information and specifications is required unit MEM16012 Interpret technical specifications and manuals should also be selected.Where gaining entry and reinstatement by straightforward replacement of existing or replacement parts is required unit MEM20030 Gain entry and reinstate fire and security containers should also be selected.Where welding skills are required, appropriate units should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: This unit has dual status and is to be regarded as both a Specialisation Band A unit and Specialisation Band B unit for progression to C5 (AQF level V).Unit Weight: 6
Notes
Elements and Performance Criteria
1. Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Select and use personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications
2. Identify service requirements
  • 2.1 Establish ownership of safe or fire container and contents and verify in accordance with organisational, legal and industry procedures
  • 2.2 Obtain type of safe and lock mechanism specifications from appropriate sources and in accordance with SOPs
  • 2.3 Establish nature of any damage or malfunction to exterior, interior and lock components in accordance with SOPs
  • 2.4 Establish service and repair requirements in accordance with SOPs
  • 2.5 Determine appropriate location of work and arrange safe removal based on requirements
3. Repair, replace and service safe components
  • 3.1 Identify risks and hazards and make area secure in accordance with SOPs
  • 3.2 Dismantle lock assemblies and components using appropriate organisational procedures, industry practices, tools and equipment
  • 3.3 Service and/or repair components based on requirements and practicality in accordance with SOPs
  • 3.4 Select appropriate lubrication and security seal and apply in accordance with SOPs
  • 3.5 Inspect boltwork and internal lock components, test and adjust for compliance to original factory assembly and functioning
4. Finalise servicing/repair process
  • 4.1 Clean work area, tools and equipment and store in accordance with SOPs
  • 4.2 Clean safe or container and return to service according to organisational and customer requirements
  • 4.3 Instruct customer, in accordance with job needs, SOPs and manufacturer recommendations
  • 4.4 Complete and process documentation in accordance with SOPs
No information
No information
Replaces
State Code National Code Title Type
OAT98 MEM20011 Service and repair fire and security containers Unit of competency