Unit of competency Outline
Date retreived
22/07/2026 8:16 AM AWST
22/07/2026 8:16 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use static machines for aluminium and uPVC chloride fabrication
Use static machines for aluminium and uPVC chloride fabrication
Unit of competency
National Code
LMFGG3020A
LMFGG3020A
State Code
S7836
S7836
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/12/2011
Field of Education
030305 - Materials Engineering
Original Release Date
01/12/2011
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to use a range of machines for fabrication of aluminium and unplasticised polyvinyl chloride (uPVC) extrusions and related materials.
Notes
Elements and Performance Criteria
1 Identify static machines suitable for aluminium fabrication, their operation and safety requirements
- 1.1 Types of aluminium and uPVC fabrication static machines are identified, including their purpose and limitations
- 1.2 Applicable occupational health and safety (OHS), legislative and organisational requirements relevant to operation of static machines for aluminium and uPVC materials fabrication are verified and complied with
- 1.3 The method of operation for static machines are identified in accordance with manufacturer operating instructions
2 Prepare static machines for use
- 2.1 Fabrication requirements are determined from drawings and specifications in a logical machining order to suit the job, following workplace procedures
- 2.2 Necessary tools and equipment, including personal protective equipment, are selected and checked prior to use to ensure that they are appropriate for the fabrication process, serviceable and in a safe condition
- 2.3 Extrusions are measured and marked according to drawings and specifications
- 2.4 Machines are set up for the required operating process with fences and guides locked into position in accordance with manufacturer instructions
3 Operate machine
- 3.1 Machine start-up procedure is carried out and checked
- 3.2 Extrusions are handled carefully and masked, where necessary, to protect finishes from damage and fed to the machine in accordance with operating procedures
- 3.3 Extrusion is set up and held in place, where applicable, for mobile machinery and moving table operations
- 3.4 Machine is operated in accordance with its designed capacity, job requirements and manufacturer instructions with excess lubricant and cuttings cleaned from extrusions, tools and equipment regularly
- 3.5 Machine shutdown procedure is carried out in accordance with manufacturer instructions after completion of the job and checked for safety
4 Check machine and attachments for serviceability
- 4.1 Machine is monitored to determine operation is to performance standards, and any faults rectified and/or reported for further action
- 4.2 Replacement cutters and attachments are fitted and secured in accordance with manufacturer specifications
5 Complete machining operations
- 5.1 Tools, equipment and unused materials are cleaned, removed and stored appropriately
- 5.2 Waste and scrap material are removed for disposal or recycling, as required
- 5.3 Work area is cleaned and rubbish disposed of, as appropriate
- 5.4 Workplace documentation is completed, as required, according to workplace procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Aluminium and uPVC fabrication static machines may include:
mitre saw:
single
double
v-notch saw
router:
single head
triple drilling
semi-automatic
variable angle end miller
beader
crimper
digital measuring system
groover:
transom
corner
reverse butt
drills:
vertical
horizontal
uPVC welder
computer numeric controlled (CNC) machines (operation only)
OHS requirementsare to be in accordance with:
Commonwealth, state or territory legislation and regulations, organisational safety policies and procedures. Requirements may include, but are not limited to:
the use of personal protective equipment and clothing
fire fighting equipment
first aid equipment
hazard and risk control and elimination of hazardous materials and substances
manual handling, including lifting and carrying
Legislative requirementsare to be in accordance with:
applicable legislation from all levels of government that affect organisational operation. Requirements may include, but are not limited to:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS requirements
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care and heritage
Organisational requirementsmay include, but are not limited to:
legal, organisational and site guidelines, policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS procedures
emergency and evacuation
ethical standards
recording and reporting
access and equity principles and practices
equipment use
maintenance and storage
environmental management (waste disposal, recycling and reuse guidelines)
Aluminium and uPVC materials for fabrication may include, but are not limited to:
extruded aluminium:
window profile
door profile
custom profile, and may be:
anodised
powder-coated
extruded uPVC:
window profile
door profile
custom profile
Manufacturer operating instructions may include:
set-up procedures
start-up and shutdown procedures
location and use of safety switches
tooling requirements
capacity and throughput
tolerances
travel
speed
operating conditions
handling and feeding of materials
safe operation, including guarding on machinery
Workplace procedures include:
workplace procedures relating to the handling and fabrication of aluminium and uPVC
work instructions, delivery dockets, job sheets and plans
workplace procedures relating to reporting and communication
safety standards, including personal protective equipment, OHS regulations and enterprise requirements
quality standards
manufacturer instructions for the use of equipment
Tools and equipmentmay include:
squares
brushes
spanners
screwdrivers
hammer
clamps
packers
wedges
measuring equipment
feeler gauges
Personal protective equipment includes:
that prescribed under legislation, regulation and enterprise policies, and may include:
hearing protection (ear plugs or muffs)
gloves
safety glasses
hard hats
safety footwear
aprons and overalls
Aluminium and uPVC fabrication static machines may include:
mitre saw:
single
double
v-notch saw
router:
single head
triple drilling
semi-automatic
variable angle end miller
beader
crimper
digital measuring system
groover:
transom
corner
reverse butt
drills:
vertical
horizontal
uPVC welder
computer numeric controlled (CNC) machines (operation only)
OHS requirementsare to be in accordance with:
Commonwealth, state or territory legislation and regulations, organisational safety policies and procedures. Requirements may include, but are not limited to:
the use of personal protective equipment and clothing
fire fighting equipment
first aid equipment
hazard and risk control and elimination of hazardous materials and substances
manual handling, including lifting and carrying
Legislative requirementsare to be in accordance with:
applicable legislation from all levels of government that affect organisational operation. Requirements may include, but are not limited to:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS requirements
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care and heritage
Organisational requirementsmay include, but are not limited to:
legal, organisational and site guidelines, policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS procedures
emergency and evacuation
ethical standards
recording and reporting
access and equity principles and practices
equipment use
maintenance and storage
environmental management (waste disposal, recycling and reuse guidelines)
Aluminium and uPVC materials for fabrication may include, but are not limited to:
extruded aluminium:
window profile
door profile
custom profile, and may be:
anodised
powder-coated
extruded uPVC:
window profile
door profile
custom profile
Manufacturer operating instructions may include:
set-up procedures
start-up and shutdown procedures
location and use of safety switches
tooling requirements
capacity and throughput
tolerances
travel
speed
operating conditions
handling and feeding of materials
safe operation, including guarding on machinery
Workplace procedures include:
workplace procedures relating to the handling and fabrication of aluminium and uPVC
work instructions, delivery dockets, job sheets and plans
workplace procedures relating to reporting and communication
safety standards, including personal protective equipment, OHS regulations and enterprise requirements
quality standards
manufacturer instructions for the use of equipment
Tools and equipmentmay include:
squares
brushes
spanners
screwdrivers
hammer
clamps
packers
wedges
measuring equipment
feeler gauges
Personal protective equipment includes:
that prescribed under legislation, regulation and enterprise policies, and may include:
hearing protection (ear plugs or muffs)
gloves
safety glasses
hard hats
safety footwear
aprons and overalls
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
read and interpret work/job specifications and drawings
identify a range of aluminium and uPVC fabrication machinery detailing their uses and limitations
identify and explain the properties and limitations of aluminium and uPVC extrusions and materials
identify the likely impact of various environmental effects on machining aluminium and uPVC
machine aluminium and uPVC extrusions on a range of static machines to meet specifications
comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for machining aluminium and uPVC to meet specified outcomes
communicate effectively and work safely with others in the work area.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to machining aluminium and uPVC
personal protective equipment
specifications and work instructions.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
read and interpret work/job specifications and drawings
identify a range of aluminium and uPVC fabrication machinery detailing their uses and limitations
identify and explain the properties and limitations of aluminium and uPVC extrusions and materials
identify the likely impact of various environmental effects on machining aluminium and uPVC
machine aluminium and uPVC extrusions on a range of static machines to meet specifications
comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for machining aluminium and uPVC to meet specified outcomes
communicate effectively and work safely with others in the work area.
Context of, and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to machining aluminium and uPVC
personal protective equipment
specifications and work instructions.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI502 | MSFGG3020 | Use static machines for aluminium and unplasticised polyvinyl chloride (uPVC) fabrication | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D674 | LMF20411 | Certificate II in Glass and Glazing | Qualification |