Qualification Outline
22/07/2026 6:07 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Glass and Glazing
Certificate II in Glass and Glazing
LMF20411
D674
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 04/10/2011 | Current | Approved |
Description
This qualification describes the skills and knowledge required to perform basic glass and glazing job roles, such as safely processing and moving thin glass. It may include assembly/repair of leadlight and stained glass involving known routines and procedures and some accountability for the quality of outcomes.
Job roles/employment outcomes
The LMF20411 Certificate II in Glass and Glazing reflects vocational outcomes for those performing operational glass and glazing functions and may include basic stained glass and leadlighting tasks.
Application
This qualification is typically used to develop skills and knowledge in glass and glazing operations where there is a clearly defined range of contexts in which the choice of actions required is usually clear and there is limited complexity in the range of options to be applied. It may include collaboration with others through members of a group or team.
Schedule
Packaging Rules
To be awarded the LMF20411 Certificate II in Glass and Glazing, competency must be achieved in thirteen(13) units of competency.- five (5) core units of competency
- eight (8) elective units of competency made up of:
-a minimum of five (5) units from Group A
-a maximum of three (3) units from Group B, made up of;
- Up to three (3) relevant units may be chosen from this Training Package, other endorsed Training Packages and accredited courses, where those units are aligned at Certificate II level (maximum 3 units) or Certificate III level (maximum 2 units).
- Units selected from other Training Packages and accredited courses must be relevant to the qualification outcome and not duplicate units available within this qualification.
- If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.
Pathways
| State Code | Title |
|---|---|
| WB49 | Pre-Apprenticeship (Glass and Glazing) |
1. Core Units
All five (5) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W8281 | MSAPMSUP102A | Communicate in the workplace | 26 | Unit of competency |
| W8247 | MSAPMOHS100A | Follow OHS procedures | 26 | Unit of competency |
| W7008 | MSAPMOPS101A | Make measurements | 20 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W8282 | MSAPMSUP106A | Work in a team | 26 | Unit of competency |
2. Group A Elective Units
Complete eight (8) units of competency, made up of:
Group A electives: a minimum of five (5) units
Group B electives: a maximum of three (3) units
The following group outlines ONE example of a training program for this qualification.
Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| C9253 | HLTFA301B | Apply first aid | 20 | Unit of competency |
| S7814 | LMFGG2008C | Glaze reglaze residential windows and doors | 72 | Unit of competency |
| S7811 | LMFGG2005C | Move glass sheets by hand | 8 | Unit of competency |
| S7812 | LMFGG2006C | Move single glass sheets by mechanical means | 16 | Unit of competency |
| S7809 | LMFGG2003C | Operate glass freefall rack and table | 8 | Unit of competency |
| S7813 | LMFGG2007C | Process glass by basic machines | 48 | Unit of competency |
| S7808 | LMFGG2001C | Use glass and glazing sector hand and power tools | 44 | Unit of competency |
3. Group B Elective Unit
A maximum of 3 units from Group B:
The following group outlines ONE example of a training program for this qualification.
Please refer to the Training Package for the full details of available options
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| D1744 | CUVVSP14B | Apply techniques to produce drawings | 40 | Unit of competency |
| S7830 | LMFGG3013C | Construct and repair leadlight panels | 56 | Unit of competency |
| W8633 | LMFFM3033B | Construct jigs and fixtures | 34 | Unit of competency |
| S7815 | LMFGG2009C | Fabricate and assemble metal frames | 48 | Unit of competency |
| S7816 | LMFGG2010C | Fabricate and install insect and security screens | 44 | Unit of competency |
| W8800 | LMFSS2004A | Undertake surface preparation | 20 | Unit of competency |
| D1683 | CUVCOR07B | Use drawing techniques to represent the object or idea | 40 | Unit of competency |
| S7836 | LMFGG3020A | Use static machines for aluminium and uPVC chloride fabrication | 30 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W024 | LMF20402 | Certificate II in Glass and Glazing | Qualification |
| W504 | LMF21208 | Certificate II in Stained Glass and Lead Lighting | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J728 | MSF20413 | Certificate II in Glass and Glazing | Qualification |
VET Info Notes
1. This qualification is the copyright of The Department of Education, Employment and Workforce Development.
2. Further information on this qualification is contained in the training Package available from national register website on Training.gov.au
3. This qualification was entered on to the STARS on 1/12/2011.
Entry Requirements
Not applicable.
Traineeships and Apprenticeships