Unit of competency Outline
Date retreived
22/07/2026 9:18 AM AWST
22/07/2026 9:18 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fabricate and assemble metal frames
Fabricate and assemble metal frames
Unit of competency
National Code
LMFGG2009C
LMFGG2009C
State Code
S7815
S7815
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/12/2011
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
01/12/2011
Nominal Hours
48
Description
This unit of competency covers the skills and knowledge required to fabricate and assemble metal frames.
Notes
Elements and Performance Criteria
1 Identify work requirements and components
- 1.1 Work requirements in the form of product to be fabricated and assembled, its use, specifications, components and attachments are identified from work instructions
- 1.2 Australian Standards relating to glass components and products associated with the process are identified and complied with
- 1.3 Occupational health and safety (OHS) requirements for fabrication and assembly of metal frames, including personal protective equipment, are observed throughout the work
- 1.4 Components, attachments, materials and tools required for the fabrication and assembly are identified and their availability, suitability (in terms of size, quantity, finish and profile), quality and serviceability ascertained
- 1.5 Tools, equipment and fixing and joining devices suitable for the method of fixing are identified and the process for the fabrication and assembly of metal frames determined
2 Prepare for fabrication and assembly
- 2.1 Work sequence is planned in a logical order to suit the product specifications and workplace procedures
- 2.2 Tools, equipment, components, attachments and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
- 2.3 Jigs identified as being required are prepared or selected and checked for suitability for purpose
- 2.4 Measurements are checked for accuracy, legibility and tolerance, and mating or directional marks noted and positioned
- 2.5 Machines and equipment are set up in accordance with production objectives, manufacturer instructions and workplace procedures
3 Fabricate and assemble components
- 3.1 Machines, tools and equipment are operated in accordance with manufacturer instructions and workplace procedures to produce components in conformance to specifications
- 3.2 Components are laid out and frames assembled ensuring conformity to specifications, alignment and appropriate fastening
4 Complete work
- 4.1 Completed frame is inspected to ensure compliance with quality standards and customer requirements
- 4.2 Equipment is cleaned, inspected and stored in accordance with workplace procedures, with unserviceable items tagged, faults identified and appropriate personnel informed
- 4.3 Work area is cleaned and rubbish disposed of, as appropriate
- 4.4 Waste materials are removed from work area and disposed of in accordance with relevant statutory requirements and enterprise requirements
- 4.5 Tools, equipment and unused materials are removed and stored appropriately
- 4.6 Workplace documentation is completed in accordance with enterprise requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Fabrication and assembly includes:
the selection of materials, components and attachments required for a metal frame, its fabrication and assembly prior to its installation. Fabrication may include, but is not limited to:
cutting
routing
milling
pressing
drilling
crimping
Personal protective equipment includes:
that prescribed under legislation, regulation and Australian Standard policies and practices, and may include:
gloves
safety glasses
gauntlets
safety footwear
hard hats
aprons and overalls
Materials may include, but are not limited to:
aluminium alloys and steel
hardware
fasteners
plastics
sealants
tapes
vinyl
gaskets and timber reveals
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
pleuws guns and general hand tools
Workplace procedures include:
workplace procedures relating to the setting and operation of machinery
machine manufacturer specifications and operational procedures
work instructions, including job sheets, cutting lists plans, drawings and designs
safety standards, including personal protective equipment, OHS regulations and enterprise requirements
AS 2047:1999 Windows in buildings - Selection and installation
Components are assembled using:
a jig (if required)
appropriate fastenings
appropriate tools and equipment
Fabrication and assembly includes:
the selection of materials, components and attachments required for a metal frame, its fabrication and assembly prior to its installation. Fabrication may include, but is not limited to:
cutting
routing
milling
pressing
drilling
crimping
Personal protective equipment includes:
that prescribed under legislation, regulation and Australian Standard policies and practices, and may include:
gloves
safety glasses
gauntlets
safety footwear
hard hats
aprons and overalls
Materials may include, but are not limited to:
aluminium alloys and steel
hardware
fasteners
plastics
sealants
tapes
vinyl
gaskets and timber reveals
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
pleuws guns and general hand tools
Workplace procedures include:
workplace procedures relating to the setting and operation of machinery
machine manufacturer specifications and operational procedures
work instructions, including job sheets, cutting lists plans, drawings and designs
safety standards, including personal protective equipment, OHS regulations and enterprise requirements
AS 2047:1999 Windows in buildings - Selection and installation
Components are assembled using:
a jig (if required)
appropriate fastenings
appropriate tools and equipment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
interpret work order/job instruction and locate and apply relevant information to fabricate and assemble metal frames
apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
complete work from product specification data sheets which may include fabricating frame and sash components
identify and select product materials
identify, select and install component hardware, including:
weather seals
wheels
stays
hinges
guides
locks
assemble frames, including:
gaskets
tapes
sealants
adhesives
fasteners
reveal linings and flashings in accordance with AS 2047:1999 Windows in buildings - Selection and installation (Section 6)
label and certify frames in accordance with AS 2047:1999 Windows in buildings - Selection and installation (Section 8)
work effectively with others.
Context of and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
frame components
consumables
workplace operating procedures
personal protective equipment
appropriate work area
tools and equipment.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Overview of assessment
Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently:
interpret work order/job instruction and locate and apply relevant information to fabricate and assemble metal frames
apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
complete work from product specification data sheets which may include fabricating frame and sash components
identify and select product materials
identify, select and install component hardware, including:
weather seals
wheels
stays
hinges
guides
locks
assemble frames, including:
gaskets
tapes
sealants
adhesives
fasteners
reveal linings and flashings in accordance with AS 2047:1999 Windows in buildings - Selection and installation (Section 6)
label and certify frames in accordance with AS 2047:1999 Windows in buildings - Selection and installation (Section 8)
work effectively with others.
Context of and specific resources for assessment
The application of competency is to be assessed in the workplace or realistically simulated workplace.
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.
Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.
Assessment is to comply with relevant regulatory or Australian Standard requirements.
The following resources should be made available:
frame components
consumables
workplace operating procedures
personal protective equipment
appropriate work area
tools and equipment.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.
Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.
Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W8673 | LMFGG2009B | Fabricate and assemble metal frames | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WI481 | MSFGG2009 | Fabricate and assemble frames | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D674 | LMF20411 | Certificate II in Glass and Glazing | Qualification |