Unit of competency Outline
Date retreived
22/07/2026 3:03 PM AWST
22/07/2026 3:03 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Fabricate and assemble metal frames
Fabricate and assemble metal frames
Unit of competency
National Code
LMFGG2009B
LMFGG2009B
State Code
W8673
W8673
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
11/06/2010
Field of Education
030707 - Metal Fitting, Turning And MacHining
Original Release Date
11/06/2010
Nominal Hours
48
Description
This unit addresses the knowledge and skills required to fabricate and assemble metal frames.
Notes
Elements and Performance Criteria
1. Identify work requirements and components
- 1.1. Work requirements in the form of product to be fabricated, its use, specifications, components and attachments are identified from work instructions
- 1.2. Australian Standards relating to glass components and products associated with the process are identified
- 1.3. Workplace health and safety requirements for fabrication and assembly of metal frames, including personal protection needs, are observed throughout the work
- 1.4. Components attachments, materials and tools required for the fabrication and assembly are identified and their availability, suitability (in terms of size, quantity, finish and profile), quality and serviceability ascertained
- 1.5. Tools, equipment and fixing and joining devices suitable for the method of fixing are identified
- 1.6. The process for the fabrication and assembly of metal frames is identified
2. Prepare for fabrication and assembly
- 2.1. Work sequence is planned in a logical order to suit the product specifications
- 2.2. Tools, equipment, components, attachments and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
- 2.3. Jigs identified as being required are prepared or selected and checked for suitability for purpose
- 2.4. Measurements are checked for accuracy, legibility and tolerance
- 2.5. Mating or directional marks are noted and positioned
- 2.6. Machines and equipment are set up in accordance with production objectives, manufacturers' instructions and workplace procedures
3. Fabricate and assemble components
- 3.1. Machines, tools and equipment are operated in accordance with manufacturer instructions and workplace procedures to produce components in conformance to specifications
- 3.2. Components are laid out and assembled using:
- 3.2.1. jig (if required)
- 3.2.2. appropriate fastenings
- 3.2.3. appropriate tools and equipment
- 3.3. Frames are assembled ensuring conformity to specifications, alignment and appropriate fastening
4. Complete work
- 4.1. Completed frame is inspected to ensure compliance with quality standards and customer requirements
- 4.2. Completed frame is inspected to ensure compliance with quality standards and customer requirements
- 4.3. Equipment is cleaned, inspected and stored in accordance with workplace procedures, with unserviceable items tagged, faults identified and appropriate personnel are informed
- 4.4. Work area is cleaned and rubbish disposed of as appropriate
- 4.5. Workplace documentation is completed in accordance with enterprise requirements
- 4.6. Waste materials are removed from work area and disposed of in accordance with relevant statutory requirements and enterprise requirements
- 4.7. Tools, equipment and unused materials are removed and stored appropriately
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines and in the assembly of frames
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Work may be performed in workplaces which are involved in the manufacture of frames from aluminium and/or steel
Fabrication and assembly
This includes the selection of materials, components and attachments required for a metal frame, its fabrication and assembly prior to its installation.
Fabrication may include but is not limited to:
cutting
routing
milling
pressing
drilling
crimping
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
pleuws guns and general hand tools
Materials may include but are not limited to:
aluminium alloys and steel
hardware
fasteners
plastics
sealants
tapes
vinyl
gaskets and timber reveals
Glass includes annealed glass, safety glass, patterned glass, tinted, heat reflective and insulated glass units.
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and Australian Standard policies and practices. It may include:
gloves
safety glasses
gauntlets
safety footwear
hard hats
aprons and overalls
Information and procedures
Workplace procedures relating to the setting and operation of machinery
Machine manufacturer specifications and operational procedures
Work instructions, including job sheets, cutting lists plans, drawings and designs
Safety standards, including personal protective equipment, OHS regulations and enterprise requirements
AS2047 Windows in Buildings
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit context
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the set up and operation of machines and in the assembly of frames
Work is carried out in accordance with statutory requirements, environment legislation, manual handling procedures and relevant regulations and organisation insurance requirements
OHS requirements may include legislation, standards, building codes, material safety management systems and local safe operating procedures
Work may be performed in workplaces which are involved in the manufacture of frames from aluminium and/or steel
Fabrication and assembly
This includes the selection of materials, components and attachments required for a metal frame, its fabrication and assembly prior to its installation.
Fabrication may include but is not limited to:
cutting
routing
milling
pressing
drilling
crimping
Tools and equipment may include:
assembly benches
drop and up-cut saws
pneumatic
hydraulic and manual presses
frame and sash tooling
copy routers
end millers
crimpers
electric and pneumatic powered drills and screwdrivers
pop rivet guns
pleuws guns and general hand tools
Materials may include but are not limited to:
aluminium alloys and steel
hardware
fasteners
plastics
sealants
tapes
vinyl
gaskets and timber reveals
Glass includes annealed glass, safety glass, patterned glass, tinted, heat reflective and insulated glass units.
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulation and Australian Standard policies and practices. It may include:
gloves
safety glasses
gauntlets
safety footwear
hard hats
aprons and overalls
Information and procedures
Workplace procedures relating to the setting and operation of machinery
Machine manufacturer specifications and operational procedures
Work instructions, including job sheets, cutting lists plans, drawings and designs
Safety standards, including personal protective equipment, OHS regulations and enterprise requirements
AS2047 Windows in Buildings
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to fabricate and assemble metal frames
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete work from product specification data sheets
Identify and select product materials
Fabricate frame and sash components, including:
cutting
tooling
routing
milling
drilling
crimping
Identify, select and install component hardware, including:
weather seals
wheels
stays
hinges
guides
locks
Assemble frames, including:
glass
gaskets
tapes
sealants
adhesives
fasteners
Reveal linings and flashings in accordance with AS2047, Section 6
Label and certify frames in accordance with AS2047, Section 8
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Frame components, consumables, workplace operating procedures, personal protective equipment, an appropriate work area, tools and equipment.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order/job instruction and locate and apply relevant information to fabricate and assemble metal frames
Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
Complete work from product specification data sheets
Identify and select product materials
Fabricate frame and sash components, including:
cutting
tooling
routing
milling
drilling
crimping
Identify, select and install component hardware, including:
weather seals
wheels
stays
hinges
guides
locks
Assemble frames, including:
glass
gaskets
tapes
sealants
adhesives
fasteners
Reveal linings and flashings in accordance with AS2047, Section 6
Label and certify frames in accordance with AS2047, Section 8
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Frame components, consumables, workplace operating procedures, personal protective equipment, an appropriate work area, tools and equipment.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment may be in conjunction with assessment of other relevant units of competency.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0320 | LMFGG2009A | Fabricate and assemble metal frames | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7815 | LMFGG2009C | Fabricate and assemble metal frames | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W024 | LMF20402 | Certificate II in Glass and Glazing | Qualification |
| W034 | LMF30602 | Certificate III in Glass and Glazing | Qualification |
| 1478 | 52263 | Certificate II in Glass Glazing (Aluminium Windows and Frames) | Accredited course |