Unit of competency Outline

Information current as of
20/10/2026 7:50 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install solar equipment on a recreational vehicle

Install solar equipment on a recreational vehicle

Unit of competency
National Code
MSMRV317
State Code
AWC54
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Original Release Date
15/12/2015
Nominal Hours
20
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Description
This unit of competency covers the skills and knowledge required to install, program and test solar equipment on a recreational vehicle. The work will be carried out in a recreational vehicle manufacturing facility.This unit of competency covers the preparation for, fitting of, and clean-up after the fitting of the solar equipment.The operator will be required to work to procedures, and follow plans/specifications for what is required.This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work
  • 1.2 Check required tools and jigs are available at the worksite
  • 1.3 Check required equipment and components are available at the worksite
  • 1.4 Identify any hazards and the related hazard controls
  • 1.5 Check the hazard controls are in place and operational
  • 1.6 Query any items that are different to usual and clarify requirements
2 Install the equipment in accordance with procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Place the equipment in the required position
  • 2.3 Clamp/hold equipment in place as required
  • 2.4 Drill holes/make any penetrations required
  • 2.5 Fix equipment to structure as required
  • 2.6 Complete fitting of equipment as required
3 Program and test solar equipment in accordance with procedures
  • 3.1 Identify programs and tests required
  • 3.2 Program the equipment to meet customer requirements following manufacturer directions
  • 3.3 Run required tests and record results as required
  • 3.4 Make adjustment in response to test results
4 Finish solar equipment installation
  • 4.1 Check equipment has been fitted correctly and make any required adjustments
  • 4.2 Clean up recreational vehicle and work area, leaving it ready for the next job
  • 4.3 Segregate and handle waste in accordance with procedures
  • 4.4 Complete any required documentation/records
No information
No information
No information