Unit of competency Outline
Date retreived
22/07/2026 2:55 PM AWST
22/07/2026 2:55 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Service bicycle steering systems
Service bicycle steering systems
Unit of competency
National Code
AURB215672A
AURB215672A
State Code
D7564
D7564
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to service and test bicycle steering systems.It requires the ability to understand specifications and use tools and equipment to service and test bicycle headsets, handlebars and stems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.This unit replaces AURB215671A Service and repair bicycle steering systems.
Notes
Elements and Performance Criteria
1. Gather information on bicycle steering system
- 1.1. Check customer requirements and confirm intended use of the unit being serviced
- 1.2. Inspect bicycle headset, handlebar and stem for faults and worn or damaged components
- 1.3. Research bicycle steering system service requirements and check specifications
- 1.4. Determine condition of system by visual, aural and tactile inspections and measurements
- 1.5. Compare conditions found with bicycle steering system specifications and customer use requirements
2. Prepare for service of bicycle steering system
- 2.1. Plan service sequence, including post-service testing and checking process
- 2.2. Determine availability of tooling and equipment
- 2.3. Prepare parts list and determine availability of replacement components
- 2.4. Select tooling and equipment to meet job requirements and check to ensure they are in good working order
3. Service and test bicycle steering system
- 3.1. Perform service of bicycle steering system according to plan
- 3.2. Use personal safety equipment and precautions to protect others in the workplace
- 3.3. Handle and maintain tooling and equipment in accordance with occupational health and safety (OHS) requirements
- 3.4. Check customer requirements and bicycle steering system specifications following service procedures
- 3.5. Operate bicycle steering system through its full range, noting test results, including non-conformity
- 3.6. Check serviced bicycle steering system, complete adjustments, and prepare unit for delivery
4. Complete work and clean up
- 4.1. Store portable tooling and equipment in approved designated areas
- 4.2. Clean up work area and dispose of waste in accordance with workplace procedures
- 4.3. Update workplace records, customer file and warranty information as required by enterprise
- 4.4. Prepare accounts and invoices as required by enterprise
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2805 | AURB215671A | Service and repair bicycle steering systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF051 | AURBTD2001 | Service bicycle steering systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D540 | AUR30211 | Certificate III in Bicycles | Qualification |
| D536 | AUR20311 | Certificate II in Bicycles | Qualification |