Qualification Outline
22/07/2026 8:43 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Bicycles
Certificate III in Bicycles
AUR30211
D540
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 20/12/2011 | Current | Approved |
Description
This qualification covers the skills and knowledge required to perform a broad range of mechanical tasks on a variety of bicycles in the bicycle retail, service and repair sector.
Job roles/employment outcomes
The AUR30211 Certificate III in Bicycles is intended to prepare new employees or recognise and develop existing workers performing mechanical and sales work in the bicycle retail, service and repair industry. The work may also include tasks related to the operation of the business and/or the supervision of others.
Employment outcomes targeted by this qualification include:
bicycle mechanics.
Application
This qualification is suitable for an Australian Apprenticeship pathway.
Schedule
Packaging Rules
To be awarded the Certificate III in Bicycles competency must be achieved in twenty eight (28) units.- six (6) core units of competency
- twenty two (22) elective units of competency, as specified below:
- a minimum of fifteen (15) specialist elective units from Group A
- a maximum of seven (7) elective units from Group B drawn in any
combination from:
- units not already chosen from Group A
- units listed in Group B
- relevant units available in this Training Package, other endorsed
Training Packages and accredited courses, where those units are
aligned to Certificate II, III and IV qualifications
- a maximum of twelve (12) elective units may be selected from units
aligned to Certificate II qualifications
- a maximum of two (2) elective units may be selected from units aligned
to Certificate IV qualifications.
Note: Where prerequisite units are identified, they must be counted in the total number of units required for completion of the qualification.
The following pairs of units must not be chosen together when achieving this qualification:
MEM05003B and AURV223808A
MEM05004C and AURV223608A
MEM05007C and AURV223608A
MEM05017D and AURV281308A
1. Core Units
All six (6) units must be completed
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W5256 | AURC272003A | Apply environmental regulations and best practice in a workplace or business | 20 | Unit of competency |
| W2828 | AURC270103A | Apply safe working practices | 20 | Unit of competency |
| D7569 | AURB254380B | Operate in a retail bicycle environment | 20 | Unit of competency |
| D3655 | MSAENV272B | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| W5022 | AURT225667A | Use and maintain measuring equipment | 16 | Unit of competency |
| W5025 | AURT270278A | Use and maintain workplace tools and equipment | 20 | Unit of competency |
2. Group A Specialist Elective Units
A minimum of fifteen (15) units to be completed.
Please refer to the Training Package for the full details of available units
3. Group B Other Elective Units
A maximum of seven (7) units may be chosen from Group B.
Please refer to the Training Package for the full details of available units.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| W2836 | AURC361101A | Adapt work processes to new technologies | 30 | Unit of competency |
| W9852 | AURV281308A | Carry out gas metal arc (MIG) welding procedures | 30 | Unit of competency |
| WB897 | BSBFLM312C | Contribute to team effectiveness | 30 | Unit of competency |
| D0949 | BSBPRO401A | Develop product knowledge | 20 | Unit of competency |
| W5418 | MEM09002B | Interpret technical drawing | 36 | Unit of competency |
| W2838 | AURC361337A | Maintain quality systems | 30 | Unit of competency |
| D1025 | BSBWOR202A | Organise and complete daily work activities | 15 | Unit of competency |
| D1028 | BSBWOR301A | Organise personal work priorities and development | 30 | Unit of competency |
| W5563 | MEM18001C | Use hand tools | 18 | Unit of competency |
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W212 | AUR30205 | Certificate III in Bicycles | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| J390 | AUR30212 | Certificate III in Bicycle Workshop Operations | Qualification |
VET Info Notes
1. This qualification is the copyright of The Department of Education, Employment and Workplace Relations.
2. Further information on this qualification is contained in the training Package available from the national register website at Training.gov.au.
3. This qualification was entered on to the STARS on 12/10/2011.
Entry Requirements
Not Applicable.
Traineeships and Apprenticeships
