Unit of competency Outline
Date retreived
22/07/2026 3:24 PM AWST
22/07/2026 3:24 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Service bicycle wheels and hubs
Service bicycle wheels and hubs
Unit of competency
National Code
AURB218267A
AURB218267A
State Code
D7567
D7567
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to inspect, and safely remove/refit bicycle wheels and service wheel hubs.It requires the ability to understand specifications and use specialist tools and equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.This unit replaces AURB218265A Remove/refit and adjust bicycle wheels.
Notes
Elements and Performance Criteria
1. Inspect bicycle wheel and hub
- 1.1. Check customer requirements and intended use of the unit in accordance with workplace procedures
- 1.2. Research bicycle wheel and hub service requirements and check specifications
- 1.3. Inspect bicycle wheel and hub for faults and worn or damaged components by visual, aural and tactile inspections and measurements
- 1.4. Compare conditions found with bicycle wheel and hub specifications and customer use requirements
- 1.5. Identify service options for bicycle wheel and hub in accordance with workplace procedures
2. Prepare for service of bicycle wheel and hub
- 2.1. Plan service sequence, including post-service testing and checking process
- 2.2. Determine availability of tooling and equipment
- 2.3. Select tooling, equipment and materials to meet job requirements and check for good working order
- 2.4. Set up work area
3. Remove bicycle wheel, service hub and refit wheel
- 3.1. Remove bicycle wheel and perform service operations according to plan
- 3.2. Use personal safety equipment and precautions to protect others in the workplace
- 3.3. Handle and use tooling and equipment in accordance with occupational health and safety (OHS) requirements
- 3.4. Check customer requirements and perform bicycle wheel service prior to refitting
- 3.5. Operate serviced bicycle wheel and hub through full range, noting test results, including non-conformity
- 3.6. Check serviced bicycle wheel and hub, complete adjustments and alignments, and prepare unit for delivery
4. Complete work and clean up
- 4.1. Store portable tooling and equipment in approved designated areas
- 4.2. Update workplace records, customer file and warranty information as required by enterprise
- 4.3. Clean up work area and dispose of waste in accordance with workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2808 | AURB218265A | Remove/refit and adjust bicycle wheels | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF056 | AURBTJ2002 | Service bicycle wheels and hubs | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D540 | AUR30211 | Certificate III in Bicycles | Qualification |
| D536 | AUR20311 | Certificate II in Bicycles | Qualification |