Unit of competency Outline

Date retreived
23/07/2026 6:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply liquid surface coatings

Apply liquid surface coatings

Unit of competency
National Code
PMBPROD249
State Code
BAJ14
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to apply liquid surface coatings to products by hand, spray gun or immersion.This unit of competency applies to operators who are required to select and prepare materials and equipment, apply surface coatings, check conformity to specifications and recognise routine and non-routine problems and take appropriate action.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check work requirements
  • 1.1 Identify work requirements from production plan or request
  • 1.2 Select and check appropriate equipment or tool/s, techniques and materials to be used
  • 1.3 Recognise requirements which may not be in accordance with usual practice
  • 1.4 Ask questions of appropriate person to confirm non standard job specifications
  • 1.5 Ensure housekeeping is to requirements
  • 1.6 Identify hazards associated with the job and take appropriate action
  • 1.7 Perform other pre-operational checks in accordance with procedures
2 Start up surface coating equipment to procedures
  • 2.1 Conduct pre-start check on equipment
  • 2.2 Start coating equipment to procedures
3 Apply surface coating
  • 3.1 Check process is operating within required limits
  • 3.2 Check coating is in specification and to required quality standard
  • 3.3 Maintain supply of materials as required
  • 3.4 Collect and segregate scrap, waste and other materials as required
  • 3.5 Complete logs and records as required
  • 3.6 Keep equipment and work area clean
  • 3.7 Shut down equipment as required
4 Respond to routine problems in accordance with procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine problems and report to designated person
No information
No information
Replaces
State Code National Code Title Type
W7581 PMBPROD249B Apply liquid surface coatings Unit of competency
Replaced By
State Code National Code Title Type
ODB69 PMBPROD249E Apply liquid surface coatings Unit of competency